RX7Club.com - Mazda RX7 Forum
Page 2 of 2
1
2
Show 50 post(s) from this thread on one page

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Vacuum Hoses: 3.5mm vs. 4mm -----> (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/vacuum-hoses-3-5mm-vs-4mm-493733/)

Mahjik 03-24-08 12:58 PM
http://www.fd3s.net/turbos.html#HOS


Code:
The sizes of hose are:

3.5mm ID, 40 feet:  fits all the small vacuum lines under and over
                    the intake manifold and extra feet for
                    aftermarket boost controllers.
4.0mm ID, 15 feet:  Windshield Washers.
6.0mm ID. 16 feet:  Intake manifold and radiator overflow and there
                    is extra hose for aftermarket boost controllers.
8.0mm ID,  4 feet:  other locations as necessary.
Depending on the hose you get, 3.5mm can just be 4mm.

LalitosRx-7 03-24-08 01:24 PM
just finished the hose job using hose techniques hose kit. the kit will give you enough to replace all the hoses plus more then enough extra hose. the 3.5mm hose fits tight enough that i didnt use the zip ties inclueded in the kit. when i called regarding the kit i asked if hey even use the ties and they said not really. mine fit nice and tight. i have plenty of pics i took if you need reference pictures.

Rx_Sam 04-01-08 12:29 PM
picture for reference are always welkom :) :) you never know :p

Mahjik 04-01-08 12:39 PM
Originally Posted by Rx_Sam (Post 8043898)
picture for reference are always welkom :) :) you never know :p
Check the write-up on Dave's site: http://www.davidgeesaman.com/


All times are GMT -5. The time now is 08:57 AM.
Page 2 of 2
1
2
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands