are the twins "dual port'?
are the twins turbo considered as dual port?
I try to set up properly my hks evc BOOST CONTROLLER on stock twins PO OR SW? SW = Swing valve (internal gate) and PO = Poppet valve (external gate) I have an apexi power fc |
https://www.rx7club.com/3rd-gen-archives-73/profec-b-spec-ii-install-review-192249/
Dual port/internally gated Matt |
Originally Posted by Mrmatt3465
(Post 12025864)
https://www.rx7club.com/3rd-gen-archives-73/profec-b-spec-ii-install-review-192249/
Dual port/internally gated Matt SO "SW" or "PO" ? FROM THE HKS EVC MANUAL: "On the back of the EVC unit is a switch marked “SW< >PO". If you have a single port, swing valve or internal type wastegate, select "SW". If you have a dual port, poppet or external type wastegate, select "PO". thanks |
Route the vacuum lines like version 1 in the link and set it to SW
Matt |
Originally Posted by Mrmatt3465
(Post 12026007)
Route the vacuum lines like version 1 in the link and set it to SW
Matt I have already installed it this way : picture attached. Seems to be similar to version 2. That's why I was thinking "Po". Not the correct way? it is from the hks manual... Thanks https://cimg5.ibsrv.net/gimg/www.rx7...03942cc47.jpeg |
Cap the other side of the gates and leave it on SW.
Matt |
Originally Posted by Mrmatt3465
(Post 12026065)
Cap the other side of the gates and leave it on SW.
Matt |
All times are GMT -5. The time now is 05:15 AM. |
© 2024 MH Sub I, LLC dba Internet Brands