Twin Turbo kit recomendations for 93??
I'm not quite a newbie to RX-7's but a newbie to this board, I was wondering u RX guru's opion on best Twin Turbo kits. Could u include site also plzz ?
|
are you looking for a ballbearing kit or just a rebuild?
|
pettitracing.com, M2performance.com (ball-bearing twins), SRmotorsports.com, BNRsupercars.com - all have hi-flo twins. Last one is the cheapest and seems like you can gain more power from them but wouldn't run them sequentially since there are bigger compressor wheels
|
The 1999 Spec twins are available and are improved from the stock units and are a direct bolt on. You will just need to upgrade your ECU to accomidate.
|
kwik
how much rwhp do you think your car has |
how much bigger are the 99 Spec than the 93? How much more power do they give off? Because from what I know the 93 and 99 have the same hp although I know the highest hp "legally" in japan is 280.
the bottom line is, is the 99 spec worth getting over the 93 twin? |
Robby's, i'm looking for Bearing turbo's not Ceramic tho i'm not rich yet.
Thanx kwik & zoom rerx7 the 93 makes 255 hp |
on a related note, i was planning on rebuilding my turbos soon with a standard rebuild kit. (a DIY kit from turbo city, or similar) but after searching and reading all the horror stories i am looking at alternatives. does any one have any experience with just replacing the cartriges. for example turbo cartridges i assume theses are new. any suggestions? and does anyone have a list of gastkets that will have to be relaced when i pull the turbos off?
|
Check out this twin turbo. This is what you need if you want to stay twin.... OH BY THE WAY, this turbos are rated at 500+hp... little pricey, but anyway you get 500hp it will be pricey...........
http://border-racing.com/main/border...turbineKIT.jpg |
Hell yah man that kit looks kick ass. But uhh how the hell would i aquire one in the US?
Thank man BTW anyone here personally done a 20b Tri turbo in thier RX? |
[i]BTW anyone here personally done a 20b Tri turbo in thier RX? [/B] ...not unless your name is KSP Engineering |
You can get that twin turbo threw me.... PM me for a price... Yep KSP did it and someone else, that their engine doesnt look so nice, but I cant remember who..
|
hey Jspecracer7, do you guys have an AUTO FREAK down there?.. Just asking because they had the TBO type I up here in Yokohama for cheap as ballz
|
So, what would one be looking at as far as an increase in hp is concerned if he upgrade to the '99 spec turbos?
|
OH the other company is AXIA they have a three turbo 20b also
|
canman6969 thanx for tha hook up, i sent you a Pm about price and specs.
|
SURE ANYTIME>>>>>
|
whats the difference between stock ball bearing and high flow? i thought most turbos were ball bering....i am probably wrong....
|
All times are GMT -5. The time now is 02:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands