Tri-Power Pod and 60mm?
 

Just wanted to ask if anyone tried to mount 60mm gauges in the Tri-Powr center channel gauge pod. I was looking at the Blitz gauges, but they only come in 60mm and the pod says 52.
Maybe they could fit with some grinding?

I e-mailed them about that very same thing :). Basically, the answer was 1 60mm and 1 52mm would be doable, but 2 60mm gauges is pushing things a bit. I plan on a 60mm Greddy mechanical boost gauge and a 52mm Greddy water temp gauge, so that works out great for me.

But, scope this -

http://hometown.aol.com/flyrx7/Rx7-Gauge-Pod.html

Same principle, but it's for 3 gauges, and you can have all 60mm gauges and in various options. Seems to also be of good quality.

Dale

Yep, the pods are "staggered", meaning one is slightly ahead of the other (the left one, IIRC). *That* one you can dremel out to accomodate a 60mm gauge, but not both.

i have frank's tri-pod with 60mm gauges and they fit and look great.