took off emissions, car won't start
 

I need help, I did the non-seq mod. and removed all of the solenoids and I bought the block off kit from the Rx7 store and removed all emissions. I have the Power fc and switched it to non-seq. Now my car won't start. and there is a small fuel leak on the primary injectors. So my question is, what could be wrong? Any help would be great. Thanks

did you plug your map sensor hose back in

yes I did.

Did you plug in the Throttle Position Sensor?

whoa, why are people ripping out every when doing the non-seq conversion??? you just gotta wire open your tca and block off like 7 hoses! if you wanna start ripping stuff out, you are suppose to do the conversion first, see if it was succusful and then take out one solonoid, drive your car for a while and see if it did anything. If not, take out the next one and keep going slowly so you dont screw yourself and kill your car (kinda like what you did to yourself). if you do too many mods at once and just rip everything out all at once, you won't know where to start cuz it could be anything. Try to put everything back to stock and see if you can get it to start up.

good luck

I'll try that and start back at square one.
Thanks for the replies.