teaser :) project almost done.... within the next week.
ok guys some of you know i have been doing some slight modification to my car. so here is a sneak preview.
http://i204.photobucket.com/albums/b...Attachment.jpg |
So what exactly are you doing to it?
|
need moar pics.
|
well i was stolen about 9 months ago, got 12k in settelment and kept the car, dumped the 12k back into it, burnout flares, burnout front fenders, carbon FEED side skirts, Carbon RE rear diffuser with Carbon center channel, Carbon underbelly pan, RPF1's custom painted gold.... might redo them black with a red pin stripe. Brembo BBK, Full susspesion, decided to rebuild the motor for the hell of it, its ready to rock, for those of you who don't know whats under the hood :
half bridge motor GT45R alky injection(thanks to BDC and ALKY control) complete fuel system and blah blah blah way to much to list out. repainted the car with house of kolur hot rod black ( satin black ) and much more that im sure im forgetting Robert high rev solutions |
|
What front bumper?
|
Originally Posted by 7_rocket
(Post 8752054)
What front bumper?
|
Nice! I really am digging the braided fuel lines with the Y block on top of the UIM, very original. Looking forward to the finished project.
|
Originally Posted by prrex4ever
(Post 8752144)
Nice! I really am digging the braided fuel lines with the Y block on top of the UIM, very original. Looking forward to the finished project.
|
Looking forward to seeing it completed. What size wheel/tire you running in the rear?
|
that engine bay looks ghettoooo, lol. i'd go nuts if mine was that much a mess.
|
Originally Posted by stokedxiv
(Post 8755908)
that engine bay looks ghettoooo, lol. i'd go nuts if mine was that much a mess.
|
Can't wait to see the end results!
|
Is it safe to have those Fuel lines Y'ed like that on top of the uim?
|
Two comments why would you run the regulator over the top of a hot turbine and downpipe... Just plain asking for trouble, we have enough engine fires as is. Also what is going on with the hot side of your ic piping straighten that mess out.
|
hes in a rush to drive the damn thing..lol
|
when you're in a rush you make mistakes and consistently second guess yourself
then when you take it out something goes wrong and you wonder why i won't though, i'll know why....you ghetto rigged your car. |
hey i'm posting from a cell phone so i'll answer all your re re questions when i get home i'm not rigging my engine bay and i'm not rushing it at all.... What you see is a very unfinished project.... The body is what is almost done not the engine bay so please if you have a problem how something is in the engine bay shove it up you ass lol cause thats not done, and there are reasons i did some of that i did so let me get to my house to explain these before you few think you know to much :) have a great day more pics coming.
|
Originally Posted by stokedxiv
(Post 8755908)
that engine bay looks ghettoooo, lol. i'd go nuts if mine was that much a mess.
Originally Posted by bzwigart
(Post 8753153)
Looking forward to seeing it completed. What size wheel/tire you running in the rear?
Originally Posted by 4CN A1R
(Post 8755929)
i agree 100%. im a perfectionist, i wouldnt be able to sleep at night
Originally Posted by 7_rocket
(Post 8756035)
Is it safe to have those Fuel lines Y'ed like that on top of the uim?
Originally Posted by fritts
(Post 8756056)
Two comments why would you run the regulator over the top of a hot turbine and downpipe... Just plain asking for trouble, we have enough engine fires as is. Also what is going on with the hot side of your ic piping straighten that mess out.
Originally Posted by mobeoner
(Post 8757074)
hes in a rush to drive the damn thing..lol
Originally Posted by tt7hvn
(Post 8757102)
when you're in a rush you make mistakes and consistently second guess yourself
then when you take it out something goes wrong and you wonder why i won't though, i'll know why....you ghetto rigged your car. as for being in a rush.... lol thats funny, i have been working on the body for the past 6 months, 9months on drivetrain and suspension , and the motor in the mist of all that, the car was stolen so its not in the best of shape.... but i can promise you this.... the car will be cherry in a weeks time, just have to get everything back and sorted out. Thanks for the positive feedback guys, i will be posting more pics later, as well as non-ghettoooooo engine bay pics for the ignorant people above :) |
I'm going to wait until your finished project to comment...
|
Originally Posted by RLaoFD
(Post 8759306)
I'm going to wait until your finished project to comment...
|
No comment on engine bay...I would do it differently, but if it makes you happy, then bitchin. Because i cant resist though...I would have done that intake for the turbo different...I know its cramped...I dont argue that at all...but I would have tinkered with clocking the intake housing, and some mandrel U bend Aluminum tubing with a tig welder.
The body work on the other hand looks freaking awesome. Digging the satin black. Moar pics! |
Originally Posted by Rotary Noob
(Post 8759400)
No comment on engine bay...I would do it differently, but if it makes you happy, then bitchin. Because i cant resist though...I would have done that intake for the turbo different...I know its cramped...I dont argue that at all...but I would have tinkered with clocking the intake housing, and some mandrel U bend Aluminum tubing with a tig welder.
The body work on the other hand looks freaking awesome. Digging the satin black. Moar pics! thanks man, yeah that hotside of the IC piping i will try redoing at a later date.... right now its functional, and doing its job of not popping off, i honestly tried everything on the front housing i tried clocking the housing every which way and i just couldn't get a nice angle.... i did tig the stainless all together and, its working for me as of now, and please remember all the bay has NOT been cleaned up at all yet, i'm doing the body and suspension first i have MUCH in store for the engine bay ;) |
ok some more pics from today about to head back to my house for more work lol
http://i204.photobucket.com/albums/b...3b/loading.jpg http://i204.photobucket.com/albums/b...13b/loaded.jpg |
oh dont worry about the works on the front and the RPF's on the rear.... im waiting for the correct tire size for the RPFs for the front.
|
All times are GMT -5. The time now is 05:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands