sup guys got a minute
 

just got the car back with another rebuild (didnt like the 1/2bridge sound) and the car runs fine. the only problem is before it gets to temperature the car stalls, Right now it has an extreme street port and it idles around 1000rpm, i want to raise the rpm to see if it will fix the stall problem and im looking for the idle screw. anybody know its location?


Thanks

-J

P.S. or if anyone else has a solution to my idle problem.. so far i got 700miles on the motor!

the idle screw is in front of the throttle body, if you are standing in front of the car. Can't miss it. It's part of the linkage where you can rev your car manually from the engine bay.

You're telling me you took out a perfectly good motor that made an assload of power because you didn't like the sound? I've seen other posts of yours where you said you loved the bridgeport. Something doesn't seem right......

he said he could make more power with the street port than he did with my 1/2 bridge. I took a ride in his 3rd gen with the same port on the same boost and rich if you were in the car you would be like damn this car is fast (the same time the car got to 160 is the time i would be hitting 140) + the car is super quiet and its the same pounds of boost. So i sold the motor to get the street port.


Im thinking because my same map of the 1/2 bridge is on there it may be a little different! as far as fuel conserning the idle issue

any more suggestions
?