Stumped on primary injector trouble
i'm having issues with there being no fuel when i crank my engine so i went through and tested somethings.
ohms test injectors each test with .000 resitance as where manual says 13.8ohm should be found. Injector plug on harness had 1.386ohm on both. volatge test injectors had none but thats no surprise the plugs on the harness had ~8v when cranking and like 0-1v whenver else. I had a extra battery so i decide to run current through the injector so see if they would click and they did. I'm just stump with why my primaries are not firing and was wondering if anyone had an idea. Thanks ~Luke |
Could be bad wires. Check your grounds too.
|
do you have fuel press?
|
Bad wires as in what wires? grounds all good and yes i have ~34psi of fuel pressure.
|
injectors each test with .000 resitance as where manual says 13.8ohm should be found. the odd 1.36 somethign ohms was just from the wires pull them. Hook them up to a 9v battery and see if they click. |
Re: Stumped on primary injector trouble
...I had a extra battery so i decide to run current through the injector so see if they would click and they did... |
didnt' see that
https://www.rx7club.com/showthread.p...hreadid=274942 Should be 12v from the relay. Maybe they not opening all the way. the resistance still makes me think it's bad injectors even if they do click. try jumping 12v on the injector and have the fuel line pressureized. See if it flows then. |
sounds like the injectors have an open in them.
|
Originally posted by mad_7tist sounds like the injectors have an open in them. |
i hate to dig up an old thread but what was the results of your problem?
I've having the same issue; |
I think that when a solution is not mentioned by the owner, we can assume that they did something really stupid and that is why it isn't posted.
We should assume this to force them to post! |
All times are GMT -5. The time now is 10:02 PM. |
© 2024 MH Sub I, LLC dba Internet Brands