RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Stock ECU Single Turbo How dangerous is it Really?? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/stock-ecu-single-turbo-how-dangerous-really-853467/)

RotaryPowah! 07-23-09 04:55 PM

Stock ECU Single Turbo How dangerous is it Really??
 
Yes I am well aware its a bad idea. I finally finished getting the car together but in the process i fryed my pettit racing ecu :icon_no2:. While tightening the battery harness to the starter it moved contacting the the body. When i hooked up the battery sparks flew. Afterwards the fuel pump wouldn't prime. I tested everything changed all relays and fuses no go. I threw in the stock ecu started right up. Im tempted to drive it as is until i can afford a PFC. WHAT DO YOU THINK???

Single turbo
Emissions Removed
Bridgeported 13b
Greddy Boost Controller
Wiring harness has resistors
Dont think the rest matters............

Thanks

spekdah 07-23-09 05:10 PM

I think you will be ok as long as you only run stock boost levels ( although that may be incorrect because an engine with single turbo and BP may be asking for more fuel at stock boost levels than a stock motor with stock twins ) .

I wouldnt drive it personally as its a lot of work that could potentially go down the drain for the sake of waiting until you can afford a PFC

arghx 07-23-09 06:02 PM

http://i.eprci.net/picard-facepalm

mr.veilsidewankel 07-23-09 06:09 PM

uuuhm, NO!
you might be able to move it around under vac alittlebit,
but boost? nope
every single bit of information the stock ecu sends out will be wrong for your setup
at boost the BP engine will flow shitloads more air (colder denser air to, since its single)
get a powerFC or better asap (cheaper than another rebuild)

RotaryPowah! 07-23-09 06:49 PM

Thanks for the responses this thing is a money pit. That John Luke Picard pic was funny.

thewird 07-23-09 06:50 PM

Your engine will blow the first time you go WOT. Depending on your seals, it may last a few more pulls but it will definitely go. I don't think a Pettit ECU would work either unless it was specifically programmed for your setup. The Pettit is just for people who install exhaust/intake/ intercooler and want a little more boost. Was not designed for single turbo.

IT'S A STUPID IDEA!

x2
http://i.eprci.net/picard-facepalm

thewird

WaachBack 07-23-09 07:05 PM

Dont boost and youll be fine.

thewird 07-23-09 07:17 PM


Originally Posted by WaachBack (Post 9378086)
Dont boost and youll be fine.

Assuming he has stock injectors, otherwise he'll carbon up his motor from running so rich.

thewird

RotaryPowah! 07-23-09 07:58 PM

The ecu was specifically programmed for my setup. Im just going to wait ive done too much work to start from square 1 again. I just remeber seeing posts with people determined to go singe with a stock ecu.. Never seen any results though.

thewird 07-23-09 08:12 PM


Originally Posted by thewird (Post 9378125)
Assuming he has stock injectors, otherwise he'll carbon up his motor from running so rich.

thewird

Scratch my comment since he has a bridgeport, it wouldn't work either way.

thewird

MOBEONER 07-23-09 08:25 PM


Originally Posted by RotaryPowah! (Post 9378229)
The ecu was specifically programmed for my setup. Im just going to wait ive done too much work to start from square 1 again. I just remember seeing posts with people determined to go singe with a stock ecu.. Never seen any results though.

will you be the Guinea pig for us all?

I would like to know what will happen

thewird 07-23-09 08:37 PM


Originally Posted by mobeoner (Post 9378284)
will you be the Guinea pig for us all?

I would like to know what will happen

I can honestly only see one thing happening lol. Besides the stock ECU shits its pants over 11 PSi.

thewird

RotaryPowah! 07-23-09 09:03 PM

Im gunna have 2 skip on being the Guinea pig. If i had to rebuild again id probably just push it out into the street set it on fire and dance around it nacked. Ive been down for 2 years & cant take any more.

Speeder165 07-23-09 09:30 PM


Originally Posted by RotaryPowah! (Post 9378384)
Im gunna have 2 skip on being the Guinea pig. If i had to rebuild again id probably just push it out into the street set it on fire and dance around it nacked. Ive been down for 2 years & cant take any more.



:lol:

thewird 07-23-09 09:31 PM


Originally Posted by RotaryPowah! (Post 9378384)
Im gunna have 2 skip on being the Guinea pig. If i had to rebuild again id probably just push it out into the street set it on fire and dance around it nacked. Ive been down for 2 years & cant take any more.

So why were you considering doing this in the first place?

http://i.eprci.net/picard-facepalm

thewird

Speeder165 07-23-09 09:32 PM


Originally Posted by arghx (Post 9377926)



That`s priceless! LOL!
A picture is worth a thousand words.

badddrx7 07-23-09 09:43 PM

1 Attachment(s)
Later

RotaryPowah! 07-23-09 10:40 PM

Its been 2 years, Its beautiful outside, I miss the stick shift, Driving fast, and driving like i own the the street sunday 2:00 am. Its my Therapy. But i can wait a month. looks like i have 2

RotaryPowah! 07-23-09 10:41 PM

Thanks again to all who posted!

smog-guy707 07-23-09 11:26 PM

i think you will be ok, i broke in my motor with the base map on the pfc, i made not one psi tho and i had stock injectors. it should be ok for you to move around but dude serioulsy... get an ecu and a tune!

GreatShamanGT 07-23-09 11:30 PM

To the Wangan!!!!

To be honest, you could drive around on that car without boost in order to break in the engine, but then again it isn't advised

WaachBack 07-24-09 12:57 AM


Originally Posted by thewird (Post 9378257)
Scratch my comment since he has a bridgeport, it wouldn't work either way.

thewird

Didnt see that he had a bridge, but I still think he'd be fine if it was just for a few days.

FixableUnknown 07-24-09 01:11 PM

Sounds like a great idea. I am always looking for a clean roller with a blown engine.

djseven 07-24-09 01:33 PM

What size turbo? This has the recipe for disaster. Why would you run a bridge port on a reflashed stock ecu(pettit)? That porting is a complete waste with you limited fuel supply(can only run 550s/850s). You could have more power, more safely, and much more reliably with the stock twins and pettit ecu. Buy a PFC asap and have it tuned. Also spend some time reading about turbos and how 10psi on the stock twins is not equivalent to 10psi on a larger turbo flowing more volume.

G's 3rd Gen 07-24-09 02:28 PM

:scratch:

Originally Posted by smog-guy707 (Post 9378768)
i think you will be ok, i broke in my motor with the base map on the pfc, i made not one psi tho and i had stock injectors. it should be ok for you to move around but dude serioulsy... get an ecu and a tune!

??? A pfc base map is a totally different than a stock ecu map. The pfc base map is even a bit more fuel involved than the pettit unlimited. Put your foot down on it and back to us! Seriously w/ how much $$ you have involved get a good used PFC! The pettit wasnt really even enough. G


All times are GMT -5. The time now is 02:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands