RX7Club.com - Mazda RX7 Forum - Standard Height of RX7 FD

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Standard Height of RX7 FD (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/standard-height-rx7-fd-831008/)

Wozza

04-06-09 05:33 AM

Standard Height of RX7 FD

Anyone know what the standard height of the RX7 is...
From Ground to Arch...

My car wasn't level last night although it was around the 70cm / 27inch mark (REAR). That was from ground to centre of arch lip...

I know wheel/ tire sizes and suspension are going to vary heights etc although just interested how low I can go. Heights are based on 18's with standard suspension..
Cheers
Woz

nashman69g

04-06-09 07:28 AM

should be about the same...

https://www.rx7club.com/showpost.php...82&postcount=5

gracer7-rx7

04-06-09 11:16 AM

Stock tire and wheel diameter is 25". I would estimate that stock ride height is around 26-27". Measuring in the rear can be tricky due to weight of fuel.

nashman69g

04-06-09 01:13 PM

i'm not sure what happened to the pics???:scratch:

ppritchard

04-06-09 03:11 PM

Here you go

http://i240.photobucket.com/albums/f...rschematic.jpg

Wozza

04-07-09 10:07 AM

Cheers for replies lads...

Time to drag into autocad and get the exact measurements.

THanks again.
Wozza

gracer7-rx7

04-07-09 12:39 PM

FYI - I believe the FSM (Factory Service Manual) has the ride height in there.

Julian

04-07-09 12:40 PM

Quote:

Originally Posted by gracer7-rx7 (Post 9104424)

Stock tire and wheel diameter is 25". I would estimate that stock ride height is around 26-27". Measuring in the rear can be tricky due to weight of fuel.

More like 24 inches

gracer7-rx7

04-07-09 05:06 PM

24.8" or 24.9" (rounded to 25") but definitely not 24" even

Julian

04-08-09 05:29 PM

Sorry; been sooo long since having stock tires I was thinking they were 45% aspect ratio not 50%

All times are GMT -5. The time now is 11:13 PM.