3rd Generation Specific (1993-2002) 1993-2002 Discussion including performance modifications and Technical Support Sections.
Sponsored by:

apexi gt spec exhaust info

Thread Tools
 
Search this Thread
 
Old 02-23-03, 10:46 AM
  #1  
Full Member

Thread Starter
 
Shabib67's Avatar
 
Join Date: Oct 2002
Location: Fairfax, VA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
apexi gt spec exhaust info

i really like this exhaust and want to get it but had a few questions on it. I know its piping is 3.74 which is pretty damn huge. how is the sound and does it come out at an angle like th n1 or hks hiper exhaust. I dont know some of my friends tell me its to rice boy looking and kind of sounds ricey too. anyone one who has the apexi gt spec care to challenge this?
Old 02-23-03, 11:21 AM
  #2  
STi Boxer power!

 
Scrapiron7's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 2,160
Likes: 0
Received 0 Likes on 0 Posts
It's a very deep sound and it comes straight out, not at an angle. I have it and am very happy with it. I am sure lots of people feel the same. It's not ricey, as it has no high pitched whine to it.
Old 02-23-03, 11:26 AM
  #3  
Full Member

Thread Starter
 
Shabib67's Avatar
 
Join Date: Oct 2002
Location: Fairfax, VA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
which exhaust do come out at an angle and is the hks titanium/carbon fiber hiper exhaust as good as the apexi gt spec
Old 02-23-03, 07:34 PM
  #4  
Full Member

 
blown's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
The gt-spec DOES come out at an angle similar to the hks hi-per. I have a Greddy PE and just swapped it out for comparison's sake. The Greddy is prob the quietest exhaust out there given the diameter of piping, but also because it follows the stock exhaust route. The gt-spec sort of cuts out 2 of the bends right before the rear supsension. The inlet for the gt-spec is actually a bit smaller for about 9 inches and then widens.
W/o the silencer, the gt-spec is unbareably loud. Forget about it if you don't want to draw attention from the local authorities (I'm in SoCal). You won't be able to have a conversation near the car without it. With the silencer, it's much better. Still somewhat deep, but at 5k rpm+ the silencer will rattle/buzz, as it's trying to push quite a lot of air thru a single hole roughly the size of a stock exhaust tip, which defeates the purpose of getting such a free-flowing catback imho.
The Greddy is the king of the riceboy look, unfortunately The HKS hi-per won't be as good as the apexi gt-spec due to the slightly smaller tubing (3 1/4 maybe), but you won't be needing a silencer as regularly either
Old 02-23-03, 07:46 PM
  #5  
STi Boxer power!

 
Scrapiron7's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 2,160
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by blown
The gt-spec DOES come out at an angle similar to the hks hi-per.
Must be the way you have yours mounted. Mine comes straight out the back at no angle what so ever.
Old 02-23-03, 08:30 PM
  #6  
Rotary Freak

 
93 R1's Avatar
 
Join Date: Aug 2001
Location: maryland
Posts: 1,734
Likes: 0
Received 0 Likes on 0 Posts
slight angle, crazy loud. Gotta love it. Very deep loud tone
Old 02-23-03, 08:54 PM
  #7  
Full Member

Thread Starter
 
Shabib67's Avatar
 
Join Date: Oct 2002
Location: Fairfax, VA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
how long does it take to put and it take out the silencer
Old 02-23-03, 09:00 PM
  #8  
Eep
brap

 
Eep's Avatar
 
Join Date: May 2002
Location: Riverside, corona ca
Posts: 315
Likes: 0
Received 0 Likes on 0 Posts
It does come out at an angle..its loud and deep...heres a pic of mine

http://newyorksteakhouse.com/eep/rx7rear.jpg
Old 02-23-03, 09:17 PM
  #9  
STi Boxer power!

 
Scrapiron7's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 2,160
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by Shabib67
how long does it take to put and it take out the silencer
Maybe 30 second? It's not much.
Old 02-23-03, 09:21 PM
  #10  
The Dude Abides

 
neevosh's Avatar
 
Join Date: Mar 2001
Location: san jose, ca
Posts: 601
Likes: 0
Received 0 Likes on 0 Posts
It's really loud. Acceleration, decelaration, cruising, it's all loud. This is with a DP and stock cat. Your ears will ring after 30min. The silencer makes a big difference, but it's way restrictive. Just no topend whatsoever and about a 2 psi loss of boost. It sounds good though. Nice and deep. But I'm sure with a midpipe it'll sound crappy. And it does come out at an angle.
Old 02-23-03, 09:22 PM
  #11  
Full Member

 
blown's Avatar
 
Join Date: Jan 2003
Location: usa
Posts: 134
Likes: 0
Received 0 Likes on 0 Posts
The silencer is just a canister about 6 inches long & the same diameter as the tip (fits the entire length of the tip). It's held in by 1 hex screw/nut at the bottom, and slides in and out pretty easily. It makes a WORLD of difference, but it buzzes/sputters from not havign the tightest fit ~4.5k rpm (could be just the one I'm using) It gets very dirty very quickly from all the exhaust.
I'll see if i can take some pics later
Old 02-23-03, 09:59 PM
  #12  
Full Member

Thread Starter
 
Shabib67's Avatar
 
Join Date: Oct 2002
Location: Fairfax, VA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
well see my dilema is i sneak out at nite with my seven haha i know that sounds gay because thats the time when all my boys come out and we go highway racing and do other fun stuff so if i can put the silencer on quickly and get out of the house and then take it off it will be a big plus. what would the sound be like if i was running the apexi gt spec a down pipe and midpipe i hear its extremley loud
Old 02-23-03, 10:17 PM
  #13  
Eep
brap

 
Eep's Avatar
 
Join Date: May 2002
Location: Riverside, corona ca
Posts: 315
Likes: 0
Received 0 Likes on 0 Posts
I have a few videos of mine, sound isnt all that great (on the cam) though, if you put a midpipe on..don't think you'll be sneaking out with those backfires... lol
Old 02-23-03, 10:21 PM
  #14  
Full Member

Thread Starter
 
Shabib67's Avatar
 
Join Date: Oct 2002
Location: Fairfax, VA
Posts: 214
Likes: 0
Received 0 Likes on 0 Posts
even with the silencer on and me driving slowly in first gear
Old 02-23-03, 10:55 PM
  #15  
Eep
brap

 
Eep's Avatar
 
Join Date: May 2002
Location: Riverside, corona ca
Posts: 315
Likes: 0
Received 0 Likes on 0 Posts
Most my backfires are in low rpm's hehe
Old 02-24-03, 03:05 AM
  #16  
Rotary Enthusiast

 
Batmobile's Avatar
 
Join Date: Jan 2002
Location: Los Angeles
Posts: 782
Likes: 0
Received 0 Likes on 0 Posts
Ok...the GT Spec is definitely at an angle. Its very loud with a dp and an mp. Especially at WOT. I've gotten 3 tickets even with the silencer on! But the performance is unmatched.


Old 02-24-03, 03:11 AM
  #17  
Banned. I got OWNED!!!
 
Join Date: Dec 2002
Location: North County, San Diego
Posts: 158
Likes: 0
Received 0 Likes on 0 Posts
batmobil. does your midpipe has a muffler in the middle? that may help it quiet down a little? i have the hks carbon ti with the muffler midpipe, it's not to bad at all
Old 02-24-03, 07:28 AM
  #18  
Eep
brap

 
Eep's Avatar
 
Join Date: May 2002
Location: Riverside, corona ca
Posts: 315
Likes: 0
Received 0 Likes on 0 Posts
Thats one dirty gt spec....or did yours not come polished for some reason?
Old 02-24-03, 08:00 AM
  #19  
Rotary Freak

 
93 R1's Avatar
 
Join Date: Aug 2001
Location: maryland
Posts: 1,734
Likes: 0
Received 0 Likes on 0 Posts
I wouldn't take out the silencer right after driving anywhere. That bitch gets hot as hell.
Old 02-24-03, 08:37 AM
  #20  
in slow, out fast!

 
apexkw's Avatar
 
Join Date: Apr 2002
Location: Florida
Posts: 1,388
Likes: 0
Received 0 Likes on 0 Posts
i have the gt spec and love it. its loud but not to bad. i run a single turbo, downpipe, pettit resonated midpipe, and gt spec exhaust. i heard that the hks exhaust hangs really low and it bottoms out even with stock suspension. anyways the gt spec is awesome and it is LOUD i can be heard coming about a 2 miles away.
Old 02-24-03, 08:38 AM
  #21  
in slow, out fast!

 
apexkw's Avatar
 
Join Date: Apr 2002
Location: Florida
Posts: 1,388
Likes: 0
Received 0 Likes on 0 Posts
oh yeah the silencer really messes with my idle. making my car want to stall. i dont like it and i never use it
Old 02-24-03, 08:40 AM
  #22  
Rotary Enthusiast

 
Batmobile's Avatar
 
Join Date: Jan 2002
Location: Los Angeles
Posts: 782
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by singleturbofd
batmobil. does your midpipe has a muffler in the middle? that may help it quiet down a little? i have the hks carbon ti with the muffler midpipe, it's not to bad at all

I was thinking about that thanks but how much of an HP loss am I looking at??
Old 02-24-03, 08:51 AM
  #23  
Rotary Enthusiast

 
Batmobile's Avatar
 
Join Date: Jan 2002
Location: Los Angeles
Posts: 782
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by Eep
Thats one dirty gt spec....or did yours not come polished for some reason?

Well, I've had the GT Spec since early 2000. The silencer have been through hell and back. With a dp and an mp the carbon deposit builds up quick. The exhaust itself is still pretty clean for being a 3 years old. So it has gone through many drag runs but its still performing.
Old 02-24-03, 09:48 AM
  #24  
GorillaRaceEngineering.co

iTrader: (1)
 
Gorilla RE's Avatar
 
Join Date: Feb 2003
Location: New Orleans
Posts: 2,048
Received 0 Likes on 0 Posts
Thumbs up

what do you think of the HKS Hiper Racing Exaust???
i really like the fact that it has 4" tubing. can you say
high flowing. i was thinking of putting it on my car.
except it's really expencive $1195. worth it?
Old 02-24-03, 10:37 AM
  #25  
STi Boxer power!

 
Scrapiron7's Avatar
 
Join Date: Apr 2001
Location: Austin, TX
Posts: 2,160
Likes: 0
Received 0 Likes on 0 Posts
Originally posted by internal comsucktion engi
what do you think of the HKS Hiper Racing Exaust???
i really like the fact that it has 4" tubing. can you say
high flowing. i was thinking of putting it on my car.
except it's really expencive $1195. worth it?
Worth it? Not for the minimal gain of .25" over the Apexi 3.74". You are nearly doubling the price for a tiny gain in pipe width. Would you notice the difference? Not likely.


Quick Reply: apexi gt spec exhaust info



All times are GMT -5. The time now is 05:36 AM.