RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Some pics of my car w/the new wheels (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/some-pics-my-car-w-new-wheels-421968/)

poss 05-02-05 08:37 PM

Some pics of my car w/the new wheels - 57 pros
 
3 Attachment(s)
After 4 years of owning my car I finally invested in some wheels. 18x10 rear (285/30) 18x9 front (255/35)
No more spinning through first gear. :D

IaMtHeRuThLeSs1 05-02-05 08:43 PM

nice...um...wheels?

EDIT:

nvm didnt show the pics the first time opps

badddrx7 05-02-05 08:44 PM

Big meats .....

IaMtHeRuThLeSs1 05-02-05 08:45 PM

very nice...

KaiFD3S 05-02-05 08:45 PM

looks good, do you rub at all

poss 05-02-05 08:45 PM

3 Attachment(s)
A few more.

My left front rubs when I am cornering hard. It sounds like the screw that holds the fender liner in. I probably just need to roll that one in a little more.

mecman 05-02-05 08:45 PM

What kind of rubber did you go with?

poss 05-02-05 08:49 PM

BFG KDW
They stick very well, but I don't have any comparison except SO-3s on my stock wheels.

rotoboy661 05-02-05 09:04 PM

nice man

i wanna sell my wheels now ;)

wylie 05-02-05 09:09 PM

Nice choice
 
Did you roll them yourself?

Did you crack your paint at all?

Look very nice BTW...

I have same wheels and tires, and yet to install them (in the middle of changing bushings and some other loose ends)

Looks like you have same offset too; +38,+40?

Again, nice choices.

poss 05-02-05 09:17 PM

Rotoboy, Your car looked so damn good, that's why I went with them...So it's your own fault. :)


I had a body shop roll the rear fenders when I had the back half rapainted. I rolled the fronts using the baseball bat method. The sheet metal was thin enough that it didn't take tons of pressure. I used a heat gun to warm the paint before rolling them. It seemed to work well enough. No cracked paint, at least not yet.

yup, 38/40 offset

Oh yeah, go AF!

SurroundedBySe7ens 05-02-05 09:19 PM

Wow they look great, very meaty. Keep up the good work!

-Adam

GoodfellaFD3S 05-02-05 09:24 PM

That FD looks like it has been properly PMCSed. Good Job Solder :patriot::bigthumb:

rotoboy661 05-02-05 09:36 PM


Originally Posted by poss
Rotoboy, Your car looked so damn good, that's why I went with them...So it's your own fault. :)


I had a body shop roll the rear fenders when I had the back half rapainted. I rolled the fronts using the baseball bat method. The sheet metal was thin enough that it didn't take tons of pressure. I used a heat gun to warm the paint before rolling them. It seemed to work well enough. No cracked paint, at least not yet.

yup, 38/40 offset

Oh yeah, go AF!

thanx

why not gold??

how much the wheels run ya and w/tires??

poss 05-02-05 10:06 PM

I thought about gold. I really wanted the RMC but that was supposed to be hard to get. I will probably get my car painted a different color in the next year or two and grey is a little more universal.

I think I got a decent deal on the wheels. The tires were nearly 1k though :(

xstacy7 05-02-05 10:07 PM

Those wheels ARE AWESOME!!!!!!!!!!! They look amazing !!! What tires are those?????

NuTbAgSaN 05-02-05 11:06 PM

:eek: very nice choice of wheels!

Denno 05-03-05 12:42 AM

Daum!! Those looks sweet.

PDX RX-7 05-03-05 01:08 AM

WOW! You and GoodfellaFD3S make me NOT want to sell my FD and put some wheels on lol DAMN That really looks sweet, I had GoodfellaFD3S on my desktop this week to get myself off my busy butt and get mine rollin again. Thanks man! ;D




93 Touring
Pineapple street polished & ported
3mm apex seals
high flow main cat
3 inch d/p
3 inch pipe no muffler
k/n filter
high efficiency aluminum radiator
stock chrome wheels w/michelin mxx3

Battyboy 05-03-05 01:28 AM

Oh man I gotta get me some wheels.

RX7UP 05-03-05 01:40 AM

The car looks Beefy!

IamRobbyah 05-03-05 05:34 AM

Wow... Gorgeous! Deep dish rims abso-friggin-lutely rock!

I must ask a question though: Unless you are a drag fan, why do a lot of guys run such staggered feet? I'm running 235/front 275/rear (bought it that way), and I got rediculous understeer. Maybe it was just the mediocre tires too (Firestone Firehawks). Also, what is the widest fronts that I could run without having to flare the fenders too much? I'd like more meat up front without losing the stock bodylines.

Thanks

poss 05-03-05 11:03 AM

Why staggered? I couldn't get this wheel in the proper offset to go with 10" wide on the front. Plus, I don't plan on really pushing it on these tires and wheels, that's what the stock wheels w/victoracers are for. I did however go to a Porsche Club autocross last weekend and didn't notice a big handling imbalance...at the same time beating the closest porsche by over 6 seconds. Poseurs. :D

vchacon 05-03-05 11:30 AM

NICE!!!

What suspension are you running?

gnx7 05-03-05 12:02 PM

Looks great.... I have the same rims.

A 275/35/18 will give you a little more traction (more sidewall to flex) if you are having difficulties putting the power down. Maybe a thought when the 285's wear out.

So do those KD's kick butt or what? You should post your observations on the new combo in the suspension/tires section. Not many reviews to share on the KD's.... would be great to hear more about them.

-Mark


All times are GMT -5. The time now is 09:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands