Smog Test -- Passed (numbers included)
 

I thought I would post this as I had been quite concerned (based on posts in here) that my new streetport engine wouldn't pass emissions tests (Georgia). Georgia uses a 25/25 (simulates using 25% available HP @ 25 MPH) test and a 50/15 (50% available HP @15 MPH) test. I'll summarize the specifics below:

You can link to my mods in the signature. Smog equipment (including air pump) is on the car and functional (still hope to hit "safe" mid 300's (+?) RWHP w/Steve Kan tune). I used datalogic to lean out test area map for the emissions testing. As you can see, it wasn't even close to failing. . .Hope this is helpful.
--Jeff

Since you justed passed you might as well get the car tuned and maybe a little upgrading. It's the perfect time.

Would you be willing to share your .dat?

I don't mind sharing, but because my current map has not been tuned properly to my new engine, it would be of little use. Having said that, to pass the emissions test I took a pretty easy, shotgun approach. I simply set the 1000, 2000, and 3000 RPM injection adjustment cells on the datalogit "settings 3" screen to 92.2%. This leaned it out enough to pass easily.

Yep, that's the info I was looking for. Thanks.