Can ungrounded wire cause the odometer not to work
#1
Can ungrounded wire cause the odometer not to work
Hello
So I have a unusual question lol so I have been doing the auto to manual swap on my fd and testing everything out as far as electrical goes ,before I get the engine in the car , I noticed my odometer isn't working anymore. I would like to add that it did work before the engine was pulled out and even tried a second one I have for spare ( I was told it also worked when previous owner pulled It out his parts car . I wanted to see if there is anything I should check ? Thanks
So I have a unusual question lol so I have been doing the auto to manual swap on my fd and testing everything out as far as electrical goes ,before I get the engine in the car , I noticed my odometer isn't working anymore. I would like to add that it did work before the engine was pulled out and even tried a second one I have for spare ( I was told it also worked when previous owner pulled It out his parts car . I wanted to see if there is anything I should check ? Thanks
#5
I don't remember if it was just the milage or the whole cluster stoped working on me for a min while doing a fpd removal but once I got all the grounds hooked back up came right back to life
Trending Topics
#9
Stock boost FTW!
iTrader: (22)
I can't say for sure as my car was on its 4th engine when I got it and the UIM was already off. The logical place for the ground, and where I placed it was under the coils. Not sure if you can access with the coils in place.
Also, to consider, are all the plugs plugged up near the computer? That's where the engine harness connects to the dash harness for this ground.
Vince
Also, to consider, are all the plugs plugged up near the computer? That's where the engine harness connects to the dash harness for this ground.
Vince
Thread
Thread Starter
Forum
Replies
Last Post
streetlegal?
New Member RX-7 Technical
13
03-17-22 02:46 PM