real quick stupid question....manifold stud size
 

ok did some quick searches and came up with nothing...is the exhaust manifold studs (the ones that go into the block) 10mm with a 1.5 pitch?

^ i need to figure this out..

14MM WITH 1.5 pitch. I think there is one 12mm on there too. Been a while since i pulled off a stock exhaust manifold.

Charlie, the studs that screw into the rotor housing are 10mm with a 1.5 pitch.

yea 10mmx1.5mm

ok thats what i thought but i wasnt certain.


Thanks guys.