The rats nest.. A Tail of breaking stuff. help
 

While pulling of my manifold today i ended up cracking 2 nipples off and breaking a check valve. It seems as though mazda decided to weld the fucking vaccum hoses onto the nipples :mad: .. hehe..

Anyhow i need some help with figuring out witch parts to buy so i can get this mofo back on the road. take a look at these pics and lemme know witch ones i need, and for you guys that went to Non-Seq, if you wanna sell me yours that would be great!! :D

http://community.webshots.com/user/bewstedzx2

RX7 Folder

damn, i cant upload a pic.. can someone host?

first pic

The heat turned that rubber into stone and made every plastic piece brittle as hell! Replace hoses with silicone as you can.

http://community.webshots.com/user/bewstedzx2


The link above is the one to look at for a good pic of the 2 pieces i need.. its in the rx7 folder

bump. really need some help here :D

The "lower" solenoid in the big picture from your site is the purge control solenoid. The "upper" solenoid is difficult to make out which it is. From left to right, the lower solenoid rack contains the double throttle control, then the charge control, then the turbo control, then the EGR control, then "switch" which regulates one of the air pump connections, the releif 1 control (also air pump related), and finally the fuel pressure regulator control.

Does that "upper"solenoid have a check valve connected to it? If so, it should be the double throttle control.

Hope this helped any...

ok if your looking at the rack of soleniods from the driver side front fender ( going left to right ) its the one furthest from the fire wall closets to the airpump ( the one on the far left ). check out that link i posted. i circled ( on the vaccum diagram chart ) what i needed.

K is the purge control valve i guess.. The other one im not sure of.

Then the upper one is indeed the double throttle control.

Do you need part numbers?

yes please! thx

OK, I have the double throttle listed as 1480-13-240A, which is specifically called a "Valve, 3 way".

I'm having a bit of trouble locating the purge control... wait a bit?

looks like the purge control is F285-18-741.

sure. i edited my above post so you can be sure of the PN#'s

wow, real time conversation! The interweb is reel neet... -slobber- :)

Hey guys, aren't all of the solenoids in the rack the same exact thing?? I know some have little filters on them, but those are removable.

Anyway, I can send you the one of the ones I have, hell, I'll send you 2 of em, I'm not sure if they are any good because they got wet when my house was flooded, but you can give it a shot. PM me an addy and I will figure out how much for shipping, I'm in OKlahoma.

I don't have the purge control, well I do, but I'm still using it on my car :)

OK, Mazda calls the solinoid 3-way valves, but they are just the regular solinoids on the racks.

ok, so the above part numers are correct?

yes.

but any of the solinoids will work, you will just have to pop off the little filters, or so I think

Jon

sweetness, thanks for all your help.. :D

Realtime baby@@!!

wow, real time conversation! The interweb is reel neet... -slobber- :)