R1 oil cooler install
 

Does anybody have any detailed pics of the R1 dual oil cooler lines installed in the car? I am attempting the installation in my 93 touring. The issue I have is the dual oil cooler hard lines installed I am unable to install my fan shroud on a fluidyne radiator. Just getting the oil cooler line to angle correctly with the oil coolers was challenging.
Tks

I'm bumping this just to see if anyone has pics handy of the stock r1 setup. I bought all the parts from a member here and had the coolers rebuilt by American Cooler. It will probably be straight forward once I get into everything, but would love some pics to make sure I run the hard lines in the right place and see where brackets go, etc. Thanks in advance for your help.
PS. I know many have done this so any tips will be appreciated.
--Jeff

I found it pretty easy myself with the radiator out etc they pretty much go straight in (my car was auto but is now an R1 series 8 with all the bits). If you are putting them in and you find they are a little too hard or just not fitting right, stand back and take a second look how they would fit in cause from memory there are 2 ways that look they can go in.

I hope these pics help.

Thanks for the pics and the note. . .I hope everything went back together?

No worries and here are a few pic's of it now :)