r-magic ac condenser
hey guys wanted to know if anyone ever ran this before its a smaller but thicker condenser from r magic that gives more room for airflow to the radiator wanted to get some feedback if anyone used it
|
I've seen similar ones on Yahoo Japan Auctions and wondered if they were any good too. "HPI Radiator Rescue"
HPI ??????????? FD3S RX-7*Radi RX7 - Yahoo!?????? - ????! |
nice find my main concern is the fittings i have an r1 and from what i remember the r1/r2 and base had one style ac and the touring had another connector wise or something like that
|
R Magic GARAGE / FD??????AC??????
Type 1 only ¥ 55,000 (consumption tax) 3 to 6-inch ¥ 38,000 (consumption tax) Normal mount vehicle about 30 minutes ¥ 4,000 (consumption tax, air-conditioner gas supplement another) "V "mount vehicle about 60 minutes ¥ 8,000 (consumption tax, air-conditioner gas supplement another) ※ air conditioning gas replenishment type 1 ¥ 20,000 (consumption tax) 2 to 6 type ¥ 15,000 (consumption tax) To me this suggests they make one with both types of connectors. I guess you'd have to supply a VIN to confirm fitment. |
awesome thanks brother
|
Will it fit a greddy v mount I wonder
|
1 Attachment(s)
I installed this on customer's car before
I would say it looks nice, but it doesn't offer much improved cooling ability, and the A/C performance went down. Brand new Mazda stock condenser(it's made by denso) cost 360+ shipping. I don't see the point of getting this "2/3 sized" condenser. picture is the brand new stock Mazda condenser, I forgot to take pic of the r-magic/hpi condenser before. |
That's what I was also worried about loosing cooling they said it's a little thick to make up the dif but I guess it don't matter
|
Originally Posted by collectiv
(Post 12088905)
Will it fit a greddy v mount I wonder
So long as a condenser mounts to the standard points, then yes it should. The Greddy emulates the standard mount points and provides adapter pipe work for the condenser, albeit for the RHD layout! |
I don't think the oem condenser is available anymore. I put the part number into Google and all the sites who list it indicate discontinued
|
Originally Posted by collectiv
(Post 12089359)
I don't think the oem condenser is available anymore. I put the part number into Google and all the sites who list it indicate discontinued
|
Originally Posted by collectiv
(Post 12089359)
I don't think the oem condenser is available anymore. I put the part number into Google and all the sites who list it indicate discontinued
See the pic I posted above. |
Originally Posted by Marf
(Post 12089387)
There are lots of aftermarket alternatives for OEM on Yahoo Japan Auctions.
|
You think the parallel flow one is worth the extra money? I'm switching to r134a and they say it isn't as cool as the r12. But maybe with a parallel flow it may help. It's alot of money though. Twice as much or more as the oem condenser.
|
if I were u I will use R152a instead.
r134a sucks no matter what condenser u uses. |
Originally Posted by Marf
(Post 12089387)
There are lots of aftermarket alternatives for OEM on Yahoo Japan Auctions.
http://bilshun.top/1/o.png |
I can ship u 1. But shipping to Euro is $$$$$
|
Originally Posted by finewayne
(Post 12089479)
????????????FD3S??????? - ?coolingdoor_west???????????????????? - ????! It's there for all auctions, run by a company called Buyee. They buy then ship onto you. Another example is rinkya.com I've used both to buy parts. There are bidding fees, commission and re-delivery to pay for. Sometime customs applied additional taxes, sometimes they didn't. |
|
I use an RX8 condenser. Has a built in dryer. Works great and costs around $100. You can get them as cheap as $50 but I went with one from Koyo.
|
So with regards to the rx8 condenser.. is there any modifications required to make the rx7 brackets line up?
|
^^ also interested :)
|
Good question. I have this on my v mount so we had to make new brackets anyway. Don't know the answer for OEM.
|
I have a greddy v mount as well. If the size is the same you can manage to make some custom brackets to mate up with the supplied v-mount brackets
|
Originally Posted by collectiv
(Post 12089713)
So with regards to the rx8 condenser.. is there any modifications required to make the rx7 brackets line up?
|
All times are GMT -5. The time now is 07:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands