Question about mbc
I'm about to get mbc and came up with some newbie questions. first, which version would you recommend? and second, what do i use to cap off wastegate control or PCA? do caps come with the kit? and last, how do i block off solenoids? do i just zip tie the hoses? or do I use the caps for this also? Thanks!
|
I'm using a hallman evolution. It's nice to be able to adjust from in the car.
I don't know the answer to your second quesion. Run a search on non sequential to get info on capping the solenoids. |
Originally Posted by wutanec
I'm about to get mbc and came up with some newbie questions.
1. first, which version would you recommend? and 2. second, what do i use to cap off wastegate control or PCA? do caps come with the kit? and last, how do i block off solenoids? do i just zip tie the hoses? or do I use the caps for this also? Thanks! 2. Just insert a "pill" with no hole into the lines from the WG & PC actuators - this handles both the actuator and the solenoid block-offs. Link to ball/spring MBC: http://www.geocities.com/chmwatson/FAQs/mbc.html?20066 My mods are in my signature. |
DaveW>my response
|
Originally Posted by JwilsonTT
I'm using a hallman evolution. It's nice to be able to adjust from in the car.
I don't know the answer to your second quesion. Run a search on non sequential to get info on capping the solenoids. The link below will bring you to the site for the controller. http://www.hallmanboostcontroller.com/ goodluck, -josh http://img.villagephotos.com/p/2005-...ecbinstall.jpg |
I use a simple Ball and spring type controller.
|
Thanks guys. I think ill go with hallman one. i'm gonna get the pro rx thingy and where in the firewall does the controller knob lining go through? and which version should i go with? 1 or 2?
|
Josh,
How is the setup you described below working out for you? David
Originally Posted by recon fd
I am running the same controller. I am using the vacuum diagram below (Version 2). Just replace the stepper motor with a manual boost controller. P.S. Hallman is the best, but expect to pay for quality!!!!
The link below will bring you to the site for the controller. http://www.hallmanboostcontroller.com/ goodluck, -josh http://img.villagephotos.com/p/2005-...ecbinstall.jpg |
All times are GMT -5. The time now is 04:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands