Problems with non sequetial
 

ok guys, i have had the non seq mod done for about a month or so, at first everythign worked fine, but now i am dropping boost at around 4700 RPM just like it was before the mod, gettin 10-12psi then around 6-7psi... im not leakin boost anywhere... and it is the poor man's mod...

Thanks

I had the same problem. I did the non-sequential and still had a boost leak after 4500RPM's. I went through the rats nest and got rid of all the solenoids that I didn't need. Then I replaced and plugged all the vaccuum lines that went to them. Problem solved. I'd go through the lines and make sure something didn't come loose.

well, that would proly be the problem, i think im gonna wait till it gets a little warmer out and elimnate all that stuff.

Does anyone have a vac hose schema for the unneeded Solenoids? I'm thinking about doing this as well, but I always like to have the schema right in front of me before pulling out parts. :)

http://home.gci.net/~bob/nonseq_vac_lines.jpg

Bob

I haven't talked to anyone about this mod....what kind of gains and or differences have you noticed and what kind of turbo lag are you getting now?

Cam

no gains or differences... just a way to feel how single turbo feels...