Problem installing Noltec motor mounts.. HELP!
Ok so it looks like one factory motor mount bracket does NOT have a hole to mount the new motor mount.Do I have to drill out the hole to install the mount?
second question... is this motor mount in the picture for the drivers side or passengers? http://i195.photobucket.com/albums/z...o/SANY0474.jpg |
Sorry buddy.. you'll need 2 of the "steel" mounts.
|
Is the steel mount for the drivers or passengers side?
|
You are really supposed to use two steel mounts with those. Otherwise you can grind the aluminum mount flat and frill a hole.
|
If you clean it, maybe you will be able to see a F or R on this piece... ^^
|
Another thing I was wondering, is when you install after market engine mounts or in my case noltec's, do I have to reuse the factory metal sheild or does it just bolt on both sides without it? If nobody knows what im talking about im willing to show pics
|
Ya, like already stated, you need another steel mount.
The aluminum is the driver's side, the steel is the passenger side. You can use a passenger side mount on the driver side as the bolt holes are an exact opposite, so it fits both sides the same. I have the Banzai poly mounts, and I picked up a steel mount for like 50 bucks in the for sale section here. If not ,I bet Fritz Flynn has one laying around. |
Hey guys 1 question... how in the world do I bolt on the factory heat sheild on the aftermarket noltec motor mount?? I really dont see how its even possible
|
Isn't there a couple threaded holes along the side of the motor mount that you can bolt the heat shield to using I think a couple small 10mm bolts?
|
Im an idiot, ya I figured that out a few hours ago lol ya looks like I had the motor mount with the threaded holes on the drivers side, so I had to remove that one and install it on the passengers side, and then everything turned out well lol finally got both installed today :)
|
Shouldn't both sides have the threads for the heat shield, or did you not end up using two steel mounts?
|
I used 2 steel mounts both look exactly the same, but for some reason one steel mount did not have the holes to install the heat shield, while the other one did. I have no idea why
|
Oh weird, I just assumed all steel mounts would have the holes for the heat shield.
|
All times are GMT -5. The time now is 08:20 PM. |
© 2024 MH Sub I, LLC dba Internet Brands