Primary rail machiningfor 850cc
Could samebody please confirm where the rail has to machined and by how much.
I think its the top where the cover goes over to secure the injector and 2 mm Thanks Scott |
I mill them for customers , Cut the .125 ,1hundred 25 thousands of an inch off the top of the rail . The end where the threaded screw holes are . I get five dollars plus shipping . the five mostly covers my time to take them to the shipping place .
|
you can just double up on the o-ring if you're in a pinch.
|
O-rings get hard and fail so with two o-rings per hole do you have double the chance to have a failure ?
|
this is true. that's why i said in a pinch
|
Cheers. i think i will get it done locally as i am lookiing to re fit next week
Scott |
Originally Posted by GARCO MOTORWORKS
I mill them for customers , Cut the .125 ,1hundred 25 thousands of an inch off the top of the rail . The end where the threaded screw holes are . I get five dollars plus shipping . the five mostly covers my time to take them to the shipping place .
If so, please tell me where to ship them, and anticipated turn-around time. Thanks, :-) neil |
M104-AMG = I PM you the info
|
All times are GMT -5. The time now is 05:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands