Power steering line size
Hey guys,
I got an rx7store.net vmount conversion. I sent in my intercooler and radiator, and apparently, if I buy the vmount directly, it would come with a new power steering line, because it doesn't clear the radiator. Well, they didn't include a line with my conversion, so I was just gonna go out and buy some copper piping from Lowes or something. Does anyone know what size the piping to the hoses are? and how long? Thanks!! |
Does anyone know?
|
as far as copper tubing you only have two size choices 3/8 tubing and 5/16 tubing. I would lean more toward 3/8 (dishwasher size) being that 5/16 copper tubing is not commonly used.
also you gotta make sure its copper tubing not copper pipe.You will also need a flaring tool and get flared fittings. don't use compression fittings they cut into the copper and will leak eventually. |
Originally Posted by MOBEONER
(Post 9820392)
as far as copper tubing you only have two size choices 3/8 tubing and 5/16 tubing. I would lean more toward 3/8 (dishwasher size) being that 5/16 copper tubing is not commonly used.
also you gotta make sure its copper tubing not copper pipe.You will also need a flaring tool and get flared fittings. don't use compression fittings they cut into the copper and will leak eventually. |
Originally Posted by GreatShamanGT
(Post 9820433)
Thanks just what I needed. Do you have any advice on what other types of piping I can use other than copper? I'm getting this stuff at Lowe's or home depot, lol.
|
All times are GMT -5. The time now is 03:43 AM. |
© 2024 MH Sub I, LLC dba Internet Brands