please help, easy ignitor harness question's
 

Does the ignitor have its own breakout harness (a small harness that would unplug from the car and plug into the ignitor)?

If so does this breakout harness plug into the engine harness or the car harness?

If not then does the ignitor plug directly into the car harness?


Thanks.......

So know one has the awnser to this, please help me out. I am putting a 13b-rew into an FC, and don't have one to look at for refrence, it should take 30 seconds looking under the hood at the ignitor to awnser this question.

thanks

Power goes directly to the ignitor from the front body harness (F). The coils are connected through a subharness. The power wire to the ignitor is b/w. The wire changes from b/w to b/r at the coil harness. The interesting thing about the ign circuit (if I'm reading the diagram correctly) is that the power supply does not pass through the main EGI relay. Instead it goes from the battery through the ignition key switch to the coils (with a few fuses thrown into the mix).

http://i90.photobucket.com/albums/k2...ics/IgnPwr.jpg

I hope that helps.