Please help alignment problem
 

Hey guys I need help bad. Yesterday on the way to school some idiot was following too closely, he clipped my drivers side rear corner which caused me to loose the rear end and I hit the side of the mountain with the passenger side front at about 20mph. I went to get my car aligned today and the guy said he couldn't get the drivers side within spec for the caster, so no it pulls to the right when driving. He said he thinks the frame may be bent, but wasn't sure. Here are the results of the alignment, does anyone have any suggestions, can I get a caster/camber kit to maybe bring it in specs. thanks

Here's the details from my alignment

Left Front
___________________Actual Before Specified Range
Camber_____________-0.69___-0.77___-0.67___0.83 (degrees)
Caster_____________7.11____6.75____5.08____7.08
Toe________________0.04____-0.41___-0.04___0.09
SAI________________14.68___14.68___.....___....
Included Angle_____14.00___13.91___.....___....
Turning Angle Diff._....___....___-6.00___-2.00

Right Front
___________________Actual Before Specified Range
Camber______________0.26____1.29____-0.67___0.83
Caster______________5.55____6.51____5.08____7.08
Toe_________________0.02____-0.43___-0.04___0.09
SAI_________________14.99___13.82___.....___.....
Included Angle______15.25___15.12___.....___.....
Turning Angle Diff._____...._.....__-6.00___-2.00

Front
_________________Actual Before Specified Range
Cross Camber_____-0.95___-2.06___-1.00___1.00
Cross Caster_____1.56____0.24____-1.00___1.00
Cross SAI________-0.31___0.86____.....___.....
Total Toe________0.06____-0.84___-0.08___0.18

Left Rear
_________Actual Before Specified Range
Camber___-1.63___-1.62___-1.97___-0.47
Toe_______0.01___0.22____-0.03____0.11

Right Rear
_________Actual Before Specified Range
Camber___-1.08___-1.05___-1.97___-0.47
Toe______0.06____0.06____-0.03___0.11

Rear
_____________Actual Before Specified Range
Total Toe_____0.07____0.29___-0.05___0.22
Thrust Angle__-0.06___0.16___-0.10___0.10

make the dude that hit you pay to have it fixed

man you don't know how much I would like to, but like the asshole he obviously was (driving like a lunatice), he didn't even stop, and I am hoping to not turn this into my insurance, high enough as it is. any help appreciated. thanks

Probably the best thing to do is to shell out the $50-$100 to get the frame measured and then take it from there...
-Mike P

Agreed!

how do you get the frame measured? i want to do this to my civic. where do you take it to? anybody know a good place in southern cali?