RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Picture And/Or information on Hose needed (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/picture-information-hose-needed-1014331/)

IWINULUZ 10-10-12 07:50 AM

Picture And/Or information on Hose needed
 
I need to get a picture of or information and part number on hose that goes from bottom of thermostat housing neck to heater core connector on firwall located on passenger side of vehicle. I cannot find this hose in my garage and need to get another one. I am running heater hose wrapped in heat coating right now. Would like to go back to original.

thank you

GoodfellaFD3S 10-10-12 08:06 AM

You'll need the OEM metal hardline that bolts to the passenger side firewall.

Call Ray Crowe at 888 533 3400 and describe to him what you need, there are 2 hoses...... one from the t-stat housing to hardline (shaped kind of like an L) and one from the hardline to heater core connection at rear firewall.

RENESISFD 10-10-12 08:08 AM

Call Ray at Malloy Mazda and get the OEM one, he has the part numbers in his head.

Depending on how old the other hoses are you may want to change all of the coolant hoses.


Edit: FAIL, too late.

GoodfellaFD3S 10-10-12 08:25 AM

^ can't hang with the old dogs, whippersnapper :burn: :D

IWINULUZ 10-10-12 11:38 AM

$40.85 hard pipe for heater fd0161220, thanks ray!

cewrx7r1 10-10-12 02:06 PM


Originally Posted by IWINULUZ (Post 11250591)
I need to get a picture of or information and part number on hose that goes from bottom of thermostat housing neck to heater core connector on firwall located on passenger side of vehicle.

If you download the Mazda manuals from

Foxed.ca - Mazda RX-7 Manuals

you could learn a lot on your own.

IWINULUZ 10-10-12 03:01 PM


Originally Posted by cewrx7r1 (Post 11250911)
If you download the Mazda manuals from

Foxed.ca - Mazda RX-7 Manuals

you could learn a lot on your own.

i used manuals hosted on rotaryheads.com before posting this thread. no picture of this hose that i found. If i learn everything for myself what is the fun in a forum, YOU CANT SPELL FORUM WITHOUT "FUN" Or RUM for that matter.


All times are GMT -5. The time now is 05:15 AM.


© 2024 MH Sub I, LLC dba Internet Brands