Pic request - RX7Store Column mount gauge pod head on.
 

I'm looking into getting this pod for my wideband but I had a similar one on my STi and blocked everything up until 60mph and 3.5k rpms.

I just wanted to see if anyone had a picture of this pod head on, preferably taken while whoever took it was sitting in the drivers seat.

http://www.rx7store.net/product_p/column%20pod.htm

Thanks!
Lee

You could be waiting a while
 

Good luck man, I just recently canceled my order for one of these from RX7store.com due to the excessively long wait time. I placed my order over a month ago and the owner still cannot say when/if he will ever get this part again.

I got one, and did not care for it, it didn't block too much, but the angle of the gauge is pointing way up, vs the rest of the cluster which is angled down.

I have one from Pettit and it doesn't block much. It is identical to the one RX7 store sells but they have them in stock. No waiting...


L8R

Pettit will fix you up right away, call Jeff




Later

You meant to say rx7store.net!!!!classic!!!!!! you're not the first nor the last.

um I get my pods from Pettit so If Im waiting Pettits customers are waiting. Sorry.

That's my worry, my bride will be basically on the floor, I will be looking slightly up at everything and I don't want the pod to be angled up, damn :(

I've had my stock seat modified, took 2 inches of foam out, so I'm pretty low as well. The best mount I've found for it was just one of the ring/screw gauge mounts, and used double sided tape to hold it onto the cover, does not block the gauges, I can see from 0rpm to 9krpm. It is a little cheap looking, but for the cost, it can not be beat!

Well, as luck would have it, I now have an RE-Amemiya steering column gauge pod, so it all worked out :)