RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Pic Request: Interior Roof w/ & w/out sunroof (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/pic-request-interior-roof-w-w-out-sunroof-821805/)

ptrhahn 02-22-09 09:58 PM

Pic Request: Interior Roof w/ & w/out sunroof
 
Could anyone post pics of the roof of the car from the inside (without headliner), for cars with & without the sunroof?

I'd like to get a good look at the assembly for both. Thanks!

Bonus: pics of sunroof disassembly/install w/ details also welcome!

cabaynes 02-23-09 05:39 AM

I have the headliner out of my R1 right now but am 2500 miles away from it for the next couple months. I'll see if I can get Dan to snap some pics.

This is the best I have for now: CLICK HERE! :) (too big to upload)

There isn't much to the roof in the R1 & Base models, it's just a sheet metal roof with a single structural bar that runs down the middle. That support bar is removable with just a couple of bolts too.

ptrhahn 02-23-09 09:21 AM

Thanks Charlie, that's helpful.

Anyone got one w/ the sunroof?

FierceAlien 02-23-09 05:14 PM

Only picture i have, Hope it helps.

https://i11.photobucket.com/albums/a...g?t=1235430788

ptrhahn 02-23-09 08:24 PM

^^^

Thanks man... looking for something similar to Charlie's for a sunroof car, i.e, well inside, with headliner off.

FierceAlien 02-23-09 09:13 PM


Originally Posted by ptrhahn (Post 8991875)
^^^

Thanks man... looking for something similar to Charlie's for a sunroof car, i.e, well inside, with headliner off.

Sorry missed that part. :wallbash:

sevensix 02-24-09 07:16 PM

the sunroof and track assembly just bolts on with 4? or 6? or something bolts and there are 2 drain hoses that hook up thats about it for install

A and B pillar covers also need to come off to get the headliner off, maybe i'll put up pictures later if i can dig them out of my hard drive

Farkel Jr. 02-24-09 07:23 PM


Originally Posted by cabaynes (Post 8989631)
I have the headliner out of my R1 right now but am 2500 miles away from it for the next couple months. I'll see if I can get Dan to snap some pics.

This is the best I have for now: CLICK HERE! :) (too big to upload)

There isn't much to the roof in the R1 & Base models, it's just a sheet metal roof with a single structural bar that runs down the middle. That support bar is removable with just a couple of bolts too.

Hey where did you get that suede shift knob or did you wrap it?

ptrhahn 02-24-09 07:46 PM


Originally Posted by Farkel (Post 8994872)
Hey where did you get that suede shift knob or did you wrap it?


Yeah, that is pretty savory. I was noticing it myself.

cabaynes 02-24-09 09:20 PM

I bought it off someone on the forum here. It's a stock FD knob wrapped in a thin suede/alacantra type material that matches my R1 seats very well :) Bought it a couple years ago, honestly forget who I got if off of but I'm sure that any fabric/interior shop could do it for really cheap.

I have always loved the stock shift knob, and this is the next best thing :)


All times are GMT -5. The time now is 06:21 PM.


© 2024 MH Sub I, LLC dba Internet Brands