People with front mounts please post pic's here
Hey everyone about to install a front mount on the FD I need an Idea on how to mount this thing and wheater I need to cut the core support or not. Also will I need to trim away at my front bumper?
Please post your install pic's here with out the front bumper and with. Thanks everyone |
5 Attachment(s)
this is how i did it...
|
4 Attachment(s)
and some ducting...
|
looks good man.
|
i have a greddy FMIC and a Cwest front. I ended up mounting the core about 2"-3" lower than where greddy designed it for because it left a 2" gap at the bottom opening of the cwest bumper. i had to get a 6" coupler for one hotside pipe and cut just a small section out to the left of the relay box in the front of the car. its a tight ass fit with my koyo, but it works. I also had to trim around 3" off the opening of the bumper
|
Originally Posted by rofuz
this is how i did it...
1. The chassis may flex slightly up there and if you hard mount it directly to the metal it will twist the rad ever so slightly causing it to develop a hair line crack over time (happened to me). 2. Its good to have some kind of vibration damping so your rad isn't getting rattled around as that can also cause some cracking. Looks good though. Nice ducting. |
1 Attachment(s)
Blitz FMIC with stainless steel wire mesh in front for rock protection (hard to see), removed plastic nose corner pieces with custom blocking plates on the sides, and single shark tooth nose mod (idea from Brad Barber).
|
Originally Posted by rofuz
and some ducting...
|
Anymore install/Installed pic's?
GREAT INFO!! |
Here is mine, didnt even have to move the Koyo
This is all custom, everything is hand made by myself http://i19.photobucket.com/albums/b1...th_Nasa067.jpg http://i19.photobucket.com/albums/b1...th_Nasa066.jpg http://i19.photobucket.com/albums/b1...h_Stuff597.jpg http://i19.photobucket.com/albums/b1...h_Stuff557.jpg http://i19.photobucket.com/albums/b1...h_Stuff578.jpg http://i19.photobucket.com/albums/b1...h_Stuff576.jpg http://i19.photobucket.com/albums/b1...h_Stuff572.jpg http://i19.photobucket.com/albums/b1...h_Stuff560.jpg http://i19.photobucket.com/albums/b1...h_Stuff558.jpg |
This was my old setup with the Greddy 2 row 24v IC. I only had to trim a little out of the back side of the opening in the front bumper so everything would fit well enough until I could put my FEED front end on.
http://i124.photobucket.com/albums/p...D/DSC01552.jpg http://i124.photobucket.com/albums/p...D/DSC00492.jpg ** All that oil was from the install of my Gotham Racing Dual-oil cooler kit btw. :eek: This is my current Greddy 2 row 24v setup. http://i124.photobucket.com/albums/p...D/DSC00568.jpg And for the record to all the useless post whores, I am AWARE of the gap in my hood as well as the hanging wiring harnesses for the turn signals. All that will be fixed in due time. Nuff' said. |
Originally Posted by 13Foxtrot
And for the record to all the useless post whores, I am AWARE of the gap in my hood as well as the hanging wiring harnesses for the turn signals. All that will be fixed in due time. Nuff' said.
|
looks good nut13b...
hey 13foxtrot, are u aware that you hood needs realigned? j/k |
1 Attachment(s)
these pics are few years old...
By 93 Blk FD back when it ran... https://www.rx7club.com/attachment.p...d=231795&stc=1 |
here a couple pics of mine its 30x12x4" BIG. removed the stock popup lights and ran the piping thru. didnt cut the chassis but needed to trim off a little bit off of the bumper, it is 4" thick dont know about 3"
|
Originally Posted by herblenny
these pics are few years old...
By 93 Blk FD back when it ran... https://www.rx7club.com/attachment.p...d=231795&stc=1 |
Originally Posted by herblenny
these pics are few years old...
By 93 Blk FD back when it ran... |
|
^ That is sooooo clean, i love it.
|
http://i22.photobucket.com/albums/b3...ermaxine/4.jpg
What do u have under you hood?? because my stock one is ripping and i need something new so my hood dont get stained black |
|
Originally Posted by felix_is_alive
|
Originally Posted by Rx7_Nut13B
Here is mine, didnt even have to move the Koyo
This is all custom, everything is hand made by myself http://i19.photobucket.com/albums/b1...h_Stuff597.jpg Nuvolari, That is a clean setup you got there, looks nice. |
Originally Posted by felix_is_alive
|
Originally Posted by silverTRD
looks good nut13b...
hey 13foxtrot, are u aware that you hood needs realigned? j/k Herblenny, that is a killer setup. I wish mine would get a girl like that! |
All times are GMT -5. The time now is 05:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands