Passenger window beltline molding problem.
The passenger side window causes the beltline molding to curl under when the window is lowered. This has been happening for a while now and the molding is worn. Does anyone know where I might find a new one? Also how would I go about removing the old and installing the new one? Thanks for any help.
John, 93 Touring. |
Hey John. Contact Ray Crowe here on the forum (crowe.ray@aol.com). He'll be able to hook you up w OEM available parts at a good price. That molding piece you describe should be in stock.
Not sure about the removal and or install. But I'll be checking back in on your thread as I have a slightly similar issue on the driver's side. :( |
Originally Posted by jhaffner
(Post 12286612)
The passenger side window causes the beltline molding to curl under when the window is lowered. This has been happening for a while now and the molding is worn. Does anyone know where I might find a new one? Also how would I go about removing the old and installing the new one? Thanks for any help.
John, 93 Touring. I hope this clears up the question. Thanks again for your help. |
I believe that’s part of the door panel, I’m not 100% sure that just that part can be replace, definitely could be wrong. I would still email mr.crowe and ask him, he’s helped me on a few things like that. He’s full of useful information |
FWIW, if you are looking for part no's, i find Jim Ellis Mazda Parts a good reference
https://www.jimellismazdaparts.com/s...category=20229 |
All times are GMT -5. The time now is 07:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands