RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - oil coolers (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/oil-coolers-134369/)

I cant recall,and I dont have access to the car right now, but on the stock twin oil coolers, are the fittings on the bottom of the cooler or the top? I thinking of doing two larger coolers to go with the larger openings on the GTC front.
I am worried about trapping air in the coolers if i set the coolers with the inlets and outlets at the bottom.
With the coolers set with the fittings at the bottom,they are easily drained but I have to believe it would be easy to trap air in them.
Anybody with the CWC kit care to comment ?
Thanks
1R1

The stock twin coolers have the inlets/outlets at the bottom of the coolers.

I've been thinking of doing this upgrade but I don't have the money yet. The kit you mentioned is very expensive for what you get. Do a search and you will find some alternatives that are realitively cheaper.