RX7Club.com - Mazda RX7 Forum
Page 3 of 3
1
2
3
Show 50 post(s) from this thread on one page

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   OFFICIAL 2010 Chris Carlisi Memorial BBQ & Cruise PIC Thread!!! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/official-2010-chris-carlisi-memorial-bbq-cruise-pic-thread-919932/)

SWAT81 09-07-10 08:49 AM
lmao you know I joked about this before but Supernaut was really the only Asian there LOL

Davin 09-07-10 09:26 AM
Originally Posted by KKMpunkrock2011 (Post 10202817)
custom LIM/UIM/TB setup? maybe a few more details? this is completely badass.
http://sphotos.ak.fbcdn.net/hphotos-..._8195298_n.jpg

since I only joined the forum after the passing of chirs, can someone point out which car was his? am I correct in assuming it's the one in the front of the group in the big group picture?
Negative, this is the X-Treme Rotaries assembly to which Roan can get them for you. He hs the east coast distributor for them, you can contact him on here under speed_NYC. They are very similar to the Pro-Jay manifold and E&J Autoworks ones, however the 'top hat' is vastly different in terms of the v-band discharge. For my next engine, I am getting the X-Treme Rotaries p-port rotor housings and X-Treme Rotaries center bearing e-shaft. In my opinion, they offer some of the best products out there:

http://img360.imageshack.us/f/ciprian20ppt001ce9.jpg/

Supernaut 09-07-10 09:41 AM
Originally Posted by SWAT81 (Post 10202984)
lmao you know I joked about this before but Supernaut was really the only Asian there LOL
OMG you're right! Considering FDs are Japanese that is pretty weird.

RENESISFD 09-07-10 10:01 AM
Originally Posted by KKMpunkrock2011 (Post 10202817)
custom LIM/UIM/TB setup? maybe a few more details? this is completely badass.
[IMG]http://sphotos.ak.fbcdn.net/hphotos-ak-snc4/hs428.snc4/47162_520584896823_29202531_30740394_8195298_n.jpg[/IMG

since I only joined the forum after the passing of chirs, can someone point out which car was his? am I correct in assuming it's the one in the front of the group in the big group picture?
This is Roan's website http://www.rxparts.com/



John

KKMpunkrock2011 09-07-10 12:19 PM
thanks for the info guys, it looks killer but WOW it's expensive.

Davin 09-07-10 05:36 PM
Originally Posted by gmonsen (Post 10203034)
Davin... My bad. Its funny, because the guy at X-treme Rptaries is "Rowan" and he's working with "Roan"... They make great stuff.

Gordon
No worries friend. I think I will be Roan's best customer in the coming year. I finished paying off my car loan this month and figured I would be able to drop $2500 a month give or take. I was going to get a Ford Raptor, but decided to keep my daily driver. Think everything from the Racing Beat cataloge, including the aluminum housings with everything else from Xtreme Rotaries. Not sure if I wanna go e85 20b or not...

MOBEONER 09-07-10 06:10 PM
Originally Posted by Davin (Post 10203839)
I was going to get a Ford Raptor,
don't get a ford. That thing will brake down on you before you hit 30k miles. The only thing ford builds tough its their commercials.

GoodfellaFD3S 09-07-10 10:21 PM
Originally Posted by MOBEONER (Post 10203898)
don't get a ford. That thing will brake down on you before you hit 30k miles. The only thing ford builds tough its their commercials.
based on research I've done, the Fusion is pretty damn reliable, in some cases lasting 250,000+ miles.

D3VIOUS-7- 09-08-10 12:05 AM
absolutely beautiful rides everyone, stunning!

Six Rotors 09-08-10 07:27 AM
Originally Posted by GoodfellaFD3S (Post 10204303)
based on research I've done, the Fusion is pretty damn reliable, in some cases lasting 250,000+ miles.
Yes but the Fusion engine(4cyl) and transmissions are Mazda.

gafu mazda 09-08-10 08:21 AM
not since they sold mazda,its all ford....unfortunately,I work for Ford.

MOBEONER 09-09-10 08:14 AM
Originally Posted by GoodfellaFD3S (Post 10204303)
based on research I've done, the Fusion is pretty damn reliable, in some cases lasting 250,000+ miles.
I am not sure of the new ford line up but I have owned a number of American vehicles mostly pick up trucks and all fall appart fairly quickly, what bothers me most (specially ford and chevy) is the terrible plastic interiors that look so cheap but is seems like they got back on track on the 2010 F150 let's see what happens. But I wouldnt go spend 40k+ on a new ford truck just yet.

Six Rotors 09-09-10 09:54 AM
Originally Posted by gafu mazda (Post 10204918)
not since they sold mazda,its all ford....unfortunately,I work for Ford.
My wife's 2009 model actually has Mazda stickers on the 5sp auto transmission!Ford still own more than 10% of Mazda(it was over 30%),they just don't have operating control anymore.
The 2.5l engines and transmissions in the Mazda 6(built in Flat Rock,Mi) and the Ford Fusion(built in Mexico are mechanically the same.

amp 09-17-10 11:21 PM
in HD...

http://www.youtube.com/watch?v=uWhAnnNzFpw

formula1fan 09-28-10 07:15 PM
Here's a video of the Club RX Quebec contingent's ice cream run . . . just before the raffle.

http://www.youtube.com/watch?v=Rk8d3-7lQQY

Thanks for the tip Gordon, the ice cream was awesome. Can't wait 'till next year to try some more flavors.


All times are GMT -5. The time now is 05:58 PM.
Page 3 of 3
1
2
3
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands