NON-seq ???
 

Ok first .. I have the pfc i did the turbo simplification and now I want to go non seq ..
Can I take all the turbo related solenoids of when I do the non seq .and to control the turbosI will have a manual boost contr...
Thanks 4 all your help ...
Dan

From my understanding you will only need one solenoid to control boost. The wastegate solenoid. When switched to non-seq with the PFC the computer sends the signals to the precontrol solenoid, dont ask me why. With the manual boost control you could probably put that in place of the solenoid... but I would stick with the one solenoid. Some one else might have more info about the manual boost controler... I haven't got into that stuff yet.

So can I take out the vacuum and pressure chambers?

Both can be removed

This pic might be able to help you.
http://home.gci.net/~bob/nonseq_vac_lines.jpg

Thanks

has any one ever done this and did you have any problems want to do it this winter!! also dont you need resistors for the unused solenoids???

7-sins,

Thanks for the killer diagram

....Rikki,

Thanks for the pics and step by step instructions on your site. I'm doing it this weekend

John

With the power fc you don't need no resistors..
A local guy has the nonseq done to his car with no solenoid at all I mean not one not even the fuel pressure solenoid . The thing is I cant get a hold of him so that's why I am asking you people for pointers !
Thanks
Dan