RX7Club.com - Mazda RX7 Forum - no air temps on commander

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - no air temps on commander (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/no-air-temps-commander-480517/)

widebody2

11-09-05 06:36 PM

no air temps on commander

Hey guys, I took off the uim and my priomary injectors today. Put them back, and everything runs fine except now my commander does not have air temp values. I'm thinking I either nocked something loose or I forgot to hook something back up to the UIM but I thought I got it all. 2 connectors on the back and one on the bottom, right? I am single. Guys what did I do? Thanks

dgeesaman

11-09-05 06:41 PM

The air temp sensor is the plug that plugs upward into the bottom of the UIM. If it's already plugged in, just remove it and plug it in again to be sure there is a good connection.

Under the UIM there is also an AWS, TPS, and Idle Air Control valve plug, depending on what you've got blocked off/disabled. Check the FSM - it should show these things.

Dave

All times are GMT -5. The time now is 03:07 PM.