RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Newbie needs buying help. (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/newbie-needs-buying-help-289956/)

poor_student 04-02-04 02:44 AM

newbie needs help
 
hi! i test-drove a couple 1993 rx7 in the past few days and the one i test-drove today has 85k miles on original engine(according to the owner, the engine hasnt been rebuilt yet). i notice that the passenger side's front end(wheel gap is larger) is higher than the driver side, this lead to the car points to the right when accelerating. my question is: what causes this and can this be repaired?

i've heard that the R1 pkg has a stiffer suspension, the owner of this rx7 doesnt know if this car has a R1 pkg or not. does the R1 pkg comes with "twin coilover"(i believe that's what i heard, correct me if incorrect). but this rx7 does have a touring pkg for sure.

one last question: is it possible for this car to go 85k miles without rebuilding the engine(such as change apex seal)?

Thank you for your help!

diablone 04-02-04 02:53 AM

It was twin oil coolers, not twin coil-overs. If it is a Touring, it is not an R1. They are both different models, and cannot be stacked. And yes, rotaries can last more then 85k. :rolleyes: Perhaps you should try looking into something else...

MakoRacing 04-02-04 02:54 AM

ouchh....flameeddd!

MR_Rick 04-02-04 09:50 AM

Man you people are hard on new guys. Remember there was a time that we were all newbies!!! If he want to get the car let him don't flame him because he's trying to get some info because he doesn't know shit about the car. At least direct him to the seach area.

silver93 04-02-04 09:54 AM

if you're not too mechanically inclined, your best bet is to search and find a shop that knows RX7s and have them do a prebuy on the car for you.

FDNewbie 04-02-04 10:08 AM


Originally posted by silver93
if you're not too mechanically inclined, your best bet is to search and find a shop that knows RX7s and have them do a prebuy on the car for you.
I thought that would be enough...but if you're not too mechanically inclined, you're better off driving something that's even somewhat reliable lol. FDs are gonna cost you a prohibitive amount of $$, and unless you're a quick learner, the only thing fast about your car is gonna be how fast it makes you broke

diablone 04-02-04 11:19 AM


Originally posted by hondasr4kids
Man you people are hard on new guys. Remember there was a time that we were all newbies!!! If he want to get the car let him don't flame him because he's trying to get some info because he doesn't know shit about the car. At least direct him to the seach area.
It wasn't just because he is new here.

Poor + Student + FD + no knowledge = very bad combination. It may sound like I and others are just being asses, but usually we're saving their ass.

4Fun 04-02-04 11:27 AM


Originally posted by diablone
It wasn't just because he is new here.

Poor + Student + FD + no knowledge = very bad combination. It may sound like I and others are just being asses, but usually we're saving their ass.

Just like he said if he is poor student I would not buy this car either. Unless you have a garage to work on the car yourself, and you have alot of cash and time to dump into the car. At 85k miles and assumming that its been babied youll need the following sooner or later
5th gear synco r&r
turbo need to r&r
vaccum lines r&r
coolant lines r&r
and the list goes on and on.

MR_Rick 04-02-04 12:48 PM

oh I know what you guys meant, but there was a time that I didn't know shit about this car and that's how we learnd. the best advise for him is to have a good friend that knows the fd and go from there. Xavier was the one who showed me some stuff. When I got my 1st FD I didn't do shit to it. I took it to a mech to get stuff done but sat there next to him to learn. on my second FD I can pretty much do most of the stuff.

poor_student 04-03-04 11:02 AM

hi! i m picking this car up today.

after reading this forum for a couple sleepless night, i've learn a lot.

i will change all fluids as I get the car: oil, transmission, differential, coolant, brake. i downloaded a copy of the service maunal from the internet and there is a maintainance guide inside and i will go from there, check spark plug, battery, hoses, fuel filter.

i've prepared some money for reliability mods. among all the reliability mods i've learned to apply i can only afford a couple of them at this time, so i will do more study and then decide which ones to do first.

RX7Wishing 04-03-04 11:07 AM

ok cool.. be sure to have an engine on order when you pick it up :p

poor_student 04-03-04 11:17 AM

i know the risk of getting an used rx7 and i m ready for it---time and money. i always liked rx7 especially its handling. it's worthy. i have about $5k under my bed and it's my rx7 emergency fund. i m getting ready for the turbo and engine rebuild.

RX7Wishing 04-03-04 11:19 AM

We dont try to be assholes here. Its just alot of people post that they want an RX7 and have no clue what they are getting themselves into. The 7 isnt really a poor mans ride. That shit will eat a hole through your wallet faster then your ex wife will.

Just be sure to check your oil everday. These fuckers love oil.

poor_student 04-03-04 11:24 AM

thanks for advising me. and put 4 oz of engine oil into the gas tank at every fill up, right?

FDNewbie 04-03-04 11:29 AM


Originally posted by poor_student
thanks for advising me. and put 4 oz of engine oil into the gas tank at every fill up, right?
Engine oil?? I've heard of doing that w/ two-stroke motor oil or Marvel Mystery Oil, but not regular old engine oil...

poor_student 04-03-04 11:30 AM

hmm, i read this from the gen3 sticky. i'll check into that again.

silver93 04-03-04 12:08 PM

so you hear another side of things, i drove my FD every day for 2 years and put about 40K miles on it. in that time, the biggest expense i had was tires. other than oil changes and plugs, the only problem i had was a rad. hose that busted. the cost of the hose was like $10. oh, and also brake pads - like $50 or something.

poor_student 04-03-04 02:34 PM

wow, u sure have a nice one to start with.

mad_7tist 04-03-04 02:40 PM

do not put motor oil in the gas!!!!!! use a good 2 stoke oil something low ash. like 4 oz per tank is nice insurace

welcome and good luck


All times are GMT -5. The time now is 06:11 PM.


© 2024 MH Sub I, LLC dba Internet Brands