RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   The New Video Clip of SCOOT 4-Rotor RX7 (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/new-video-clip-scoot-4-rotor-rx7-271713/)

ZenTrickz 02-19-04 05:49 AM

Stupid question but, are they releasing that body conversion at all?

RX7Wishing 02-20-04 11:46 AM

damn, i see that motor and i think.. shit.. more apex seals to break.

jdhuegel1 02-20-04 12:12 PM


Originally posted by RX7Wishing
damn, i see that motor and i think.. shit.. more apex seals to break.
But it's N/A.

Sloraxe 03-03-04 05:23 PM

Everything is kickasss save the monte carlo inspired rear.

rotor_convert 03-04-04 12:38 AM

sweet car. loved the sound. i do agree, i wasn't too fond of the rear end. it overextended the whole rear end. i just couldn't get used to it. overall the kit had some sweet lines on it though.

mfigr1 03-04-04 01:11 PM

This thread reminds me about the D1 drift event. I saw a new 350Z in the car show that had a carbon fiber hood that was a replica of the RX7 Scoot hood. It bothered me that they straight out ripped off the design.

KaizoRX7 03-04-04 02:06 PM

Looks nice but I agree the rear is definately "different". I also thought it sounded more aggressive in the 1st premier vid. Hope they will show more racing w/ it.

villision 03-04-04 02:08 PM


Originally posted by FDNoi2egard
Agreed, and the hood is gay as well. But I do like the rest of the front end.......
For you saying you think the hood is gay...and you dream about nocab car...maybe you didn't know this...nocab now runs with the scoot carbon fiber hood...how gay...lol...car is badass hoever the rear end...

Ty

D1Import2nr 03-06-04 01:38 AM


Originally posted by agantf5
The rims are from ENKEI.
It's called RP-F1, and is very very light weight.
So, I got four 17"s for my 93 FD, but not that expensive.

You can check the info of those wheels below.
http://www.enkei.com/New%20Product/2004HP.html

I personally am satisfied with them.

Whered u get them and for how much?

pnoy1duh 03-07-04 05:53 PM


Originally posted by mfigr1
This thread reminds me about the D1 drift event. I saw a new 350Z in the car show that had a carbon fiber hood that was a replica of the RX7 Scoot hood. It bothered me that they straight out ripped off the design.
interesting that you say that, because the scoot hood was actually inspired by a LeMans Porche race car...somebody here has a link i'm sure

BlackFC_NYC 03-08-04 06:19 PM

wish the guy got on it in the vid

MADBOOST 03-08-04 07:09 PM

that is the gayest vid ever, dont even think the car is fast by the vid... i think the back end looks real nice, but definately not on an rx7, it would look nice on a car that wasnt as rounded and contoured as the FD..

my big question is: is it all motor then? like the 4 rotor Mazda that won those endurance races? i didnt see a intercooler either.

MADBOOST 03-08-04 07:09 PM

that is the gayest vid ever, dont even think the car is fast by the vid... i think the back end looks real nice, but definately not on an rx7, it would look nice on a car that wasnt as rounded and contoured as the FD..

my big question is: is it all motor then? like the 4 rotor Mazda that won those endurance races? i didnt see a intercooler either.

RobertoMartinez 03-11-04 02:44 PM

i have the video of the 4 rotor rving up in the shop as the guy starts it and it has ITB for each housing. how do i post it?

MR_Rick 03-11-04 08:18 PM

love the headlights, I want a set

TigerShyVII 03-15-04 06:09 PM

I've done some searching and found two other videos of the Scoot FD..or whatever it is now..Short Option 2 Review
Little Engine Clip

Vo-Tech student 03-25-04 02:39 AM

hmmm would definately love to have that front bumper. Any word on if they are going to sell them?

RX7INSAC 03-25-04 01:53 PM

That is the sickest 7 I've ever seen!!!!!

Frankenrex 03-25-04 01:54 PM

I love the concept, and I like the car - until you get around the back. I appreciate the work that went into it, but it just doesn't *work*. I think it's because of all the sharp angles and creases fighting with the curves that make up the rest of the car.
I absolutely love the beautiful noise the engine makes, though, especially in the "Short Option 2 Review" vid!

AutoTech1985 04-08-04 09:15 PM

The vid was SICK but the back end looks like its a wannabe Porsche GT or something

rotoryspeeddreamz 04-09-04 04:23 AM

car looks good, the back end... everyone has their own style.

the video was boring and didn't do the car justice

cripsR6 04-09-04 12:34 PM

funky taillights look domestic!

TracyRX7 04-12-04 09:35 PM


Originally posted by joep
I realize this. The car itself needs work. I got a deal i couldnt pass up. I also figured that if i was going to put a V-8 in one, I couldnt pull myself to do it to a really nice one. I enjoy projects. I think i may want to throw the 4 rotor in a FD. I dont see many Fd without engines that arent totalled. What would be a decent price for just a shell. It can be bone stock. I dont need anything done to it!
I saw a non-totalled (no frame damage, it did have body damage, some missing interior parts and no engine/tranny and probably salvage title) FD shell on Auto Trader within 100 miles of 95377 about 2-3 weeks ago, not sure if its still there. They were asking $6000 I believe.

speed7 04-13-04 01:28 AM

I like it.. if mazda were to make a car similar to that.. a curvey Lexus GS 300 is what it kinda reminds me of. Even though the interior is totaly rx based...

The outside just reminds me of luxuary not so much as sport.. dunno why...

speed7 04-13-04 01:30 AM


Originally posted by TigerShyVII
I've done some searching and found two other videos of the Scoot FD..or whatever it is now..Short Option 2 Review
Little Engine Clip

Ok, I take that back.. seeing that I say its a monster... wow.. nice engine.


All times are GMT -5. The time now is 01:55 PM.


© 2024 MH Sub I, LLC dba Internet Brands