RX7Club.com - Mazda RX7 Forum
Page 1 of 2
1
2
Show 50 post(s) from this thread on one page

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   New Rims on the car! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/new-rims-car-367889/)

ejmack1 11-13-04 03:33 PM
New Rims on the car!
 
Cant wait to get it painted and start driving the POS....

That front end might settle back down from being up in the air for so long :rlaugh: looks li8ke i have 2-3 inches of wheel gap :redface:

http://www.springfieldmortgage.net/f...s/IMG_0061.JPG
http://www.springfieldmortgage.net/f...s/IMG_0062.JPG

RX7 RAGE 11-13-04 03:48 PM
i like ur personal plate :).....i got "FD3SREW" for mine. car looks real clean btw.

ejmack1 11-13-04 03:53 PM
I figured "ARGH" explains my thoughts about the car to a "T"

:)

kind of fit in with the "X 7" at the end

rotoboy661 11-13-04 03:54 PM
sf challenge???

dope wheels

lower that bitch more man

ejmack1 11-13-04 03:59 PM
Originally Posted by rotoboy661
sf challenge???

dope wheels

lower that bitch more man
read my 1st post ;)

its already lowered 2 inches it hasn't been really driven in over 2 years... and the front end was off the ground a majority of the time... the springs just need to settle in and those wheels will nearly tuck ;)

ejmack1 11-13-04 04:00 PM
Originally Posted by rotoboy661
sf challenge???

dope wheels

lower that bitch more man
SF Challenge?

RX7 RAGE 11-13-04 04:13 PM
hes referring to the wheels ejmack....what kinda wheels are those?

DeviousDevice7TT 11-13-04 04:14 PM
sweet!!

Scrapiron7 11-13-04 04:26 PM
Looks good :bigthumb:

DrunkenBowler 11-13-04 06:08 PM
Nice.

KaiFD3S 11-13-04 06:13 PM
looking good...

MakoRacing 11-13-04 06:38 PM
very nice!

scratchjunkie 11-13-04 06:42 PM
ARGH! hahaha i love it!

1revn3rdgen 11-13-04 07:27 PM
Looks good.I would also like to know what wheels are those?

areXseven 11-13-04 08:29 PM
Look pretty without a rear spoiler.

Quickfini 11-13-04 08:41 PM
Those are ADR Cypher's right? Looks niceeeee! :)

ejmack1 11-13-04 08:42 PM
Originally Posted by Quickfini
Those are ADR Cypher's right? Looks niceeeee! :)
yes they are.... let the flaming begin :redface:

DavidR 11-13-04 08:45 PM
Very nice

C-westin'FD 11-13-04 08:59 PM
Looks Good!!!

FDNewbie 11-13-04 09:12 PM
Originally Posted by ejmack1
I figured "ARGH" explains my thoughts about the car to a "T"

:)

kind of fit in with the "X 7" at the end
NICE. Couldn't have said it better myself haha. Car's lookin good man :)

RX7UP 11-13-04 09:19 PM
What's are the sizes?

ejmack1 11-13-04 09:36 PM
Originally Posted by RX7UP
What's are the sizes?
18x9.5 275's rear

18x8.5 245's front

RX7UP 11-13-04 10:22 PM
Originally Posted by ejmack1
18x9.5 275's rear

18x8.5 245's front
275 what?
245 what?

Nice!... Did you have to roll the fenders in the front?.... Do you think 18x10 295/35 can fit in the rear?

FDNewbie 11-13-04 10:34 PM
Originally Posted by RX7UP
Nice!... Did you have to roll the fenders in the front?.... Do you think 18x10 295/35 can fit in the rear?
I have 245/35/18s in the front, and 285/30/18s in the rear, 100% stock suspension, no probs in the rear at all. The front tires rub against the front fender lining during sharp turns, however (the fender lining that's in front of the tire, sitting between the tire and the engine bay)

RX7UP 11-13-04 10:41 PM
Originally Posted by FDNewbie
I have 245/35/18s in the front, and 285/30/18s in the rear, 100% stock suspension, no probs in the rear at all. The front tires rub against the front fender lining during sharp turns, however (the fender lining that's in front of the tire, sitting between the tire and the engine bay)
What size rims do you have?

Do you think that 235/40/18 fit in the front with a 18X8 rim?

How about 295/35/18 on a 18X10 rim in the rear?


All times are GMT -5. The time now is 03:53 AM.
Page 1 of 2
1
2
Show 50 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands