Need Some Help With Wireing Harness and fuel system
 

Hey all,

1) I currently am went single turbo and got block off plates for my smog and emissions, and I need some help with the wiring harness I know there are people with the same set up as me and was wondering if anyone had a diogram of this for me thanks.


2) IF there is a diogram of the fuel system that would help too
(I have KG primary and secondary fuel rail, 1000cc by 1680cc injectors TOP FEED which wont fit...and high flow fuel presure regulator, and a Warbro 255 fuel pump)



also I was wondering where to take me car to get it finished I have the wiring harness and fuel system left to hook up and need some help finding a place in the bay area that can work on FD's besides vishnu which will charge me up the ass thanks for the help

I don't usually like to cut the harness, unless you are sure you will never revert back to stock. I rather tape up and tuck away the unused connnectors. What is the problem with the top feed injectors? In most cases you need to modiofy or remove the fuel atomizers or the injectors won't fit. Where are you located?

He's in cali, far far away from you Mr. Huk......

how did you know yay area meant cali? i didnt know you were into the bay area movement jk.


http://img100.imageshack.us/my.php?i...uelline2rj.jpg

http://img129.imageshack.us/my.php?i...uelline7dd.jpg

no the wiring harness isnt cutt its just tucked away

He mentions 'bay area' in the last sentence of his post ;)