RX7Club.com - Mazda RX7 Forum - Need a new Clutch

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)

- 3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)

- - Need a new Clutch (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/need-new-clutch-132381/)

sdushane

11-12-02 05:24 PM

Need a new Clutch

I need a new clutch for my 95 FD. I would like an upgrade to a slightly nicer gripping clutch (Nothing to outragious ie.. ACT 2600) I would like to get an ACT, i believe i can get one for cost... While i am downthere... i might replace to a lighter flywheel... any suggestions ... thanks

-Scott

Dragonz818

11-12-02 05:38 PM

I have the act extreme pressure plate I think thats the 2600 pound one. I also have the street/ strip disk. Pucked is to hard on the tranny for daily driving in my opinion. I love this clutch grips perfectly. I have never heard anything bad about this setup. I also have an M2 lightened flywheel which I likie as well..

Dragonz818

11-12-02 05:40 PM

BTW its definately not toomuch for daily driving the only difference is its a little stiffer....

Bucrx7

11-12-02 06:09 PM

I have the Bonez street/strip clutch. It's the same as the ACT, they both use upgraded pressure plate which is 30% stiffer then stock with a stock clutch disk.

All times are GMT -5. The time now is 03:27 AM.