Need help with injector wiring
 

I do not know what to search for on this topic so I am hoping a mod or some one can point me in the right direction.

I am upgrading my secondary injectors to 1600's and need to wire in resistors. I have the wiring harness pulled out and need to know which color wires on the injector wires are the secondary from the primary.

It is my understanding that I can simply wire in the resistors on either the hot wire / ground wire?

Somone fill in the blanks for me please:

Rear = closest to the fire wall

1.) Solid Green is the (front / rear) (primary/secondary)
2.) Green with a black stripe (front / rear ) (primary / secondary)
3.) Green with a red stripe (front/rear) (primary/secondary)
4.) Green with a yellow stripe (front/rear) (primary/secondary)

Thanks in advance

One more, regarding the AWS & the Intake Air Temp (IAT) connector...

Which is which

Brown with yellow stripe & Black with white stripe

Brown with black stripe & Green

I am pretty sure I recall the IAT being the one with green & brown w/ black stripe but I am not sure. The tape fell off from when I originally marked a lot of these connectors.

Never mind, I found it... and my memory was wrong apparently


Here are the injector schematics as well

to some this thread might appear pointless... but i learned from it. thx mayne

im guessing you learned that almost everything asked on this forum can be found in the FSM, Electrical Diagrams, or the Search button? I think before you post you should be required read the FSM and take a test on it hahaha

tee hee