RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Need Help! (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/need-help-520399/)

JDMEnthusiast Mar 18, 2006 03:13 PM

Need Help!
 
2 Attachment(s)
does anyone happen to know where these plugs belong? PICTURE 1 is located behind the powersteering pump.. PICTURE 2 is located behind the alternator.

bajaman Mar 18, 2006 03:15 PM

Yup! That is the 02 sensor plug.

Sorry...I didn't see clearly where it was at....you are coming off the large harness right behind the power steering pump....NOT behind the UIM as I first thought.

Hell....I JUST hooked this thing up a couple of weeks ago. It comes from right down the right front side of the engine, it comes from just underneath the oil filler neck. That is all I can see right now....sorry!

GoodfellaFD3S Mar 18, 2006 03:15 PM

Hmmmm. Air Conditioning compressor perhaps?

Edit: I was basing this on the proximity to the oil dip stick, ie location in engine bay.

if you have the harness out of place, than never mind. it definitely could be the o2 sensor as baja states.

JDMEnthusiast Mar 18, 2006 03:18 PM

what about the second picture?

GoodfellaFD3S Mar 18, 2006 05:04 PM


Originally Posted by JDMEnthusiast
what about the second picture?

It could be for the oil pressure sensor on the driver's side of the block. When I drive my FD tomorrow I can check for you.

IRPerformance Mar 18, 2006 05:29 PM

The first on looks power steering, the second a/c. You shouln't be able to mix them up. The 02 sensor is no where near there. BTW, that harness is toast. The looming around the crank angle sensor wires is all broken off and the shielded wire is exposed.


All times are GMT -5. The time now is 08:52 AM.


© 2026 MH Sub I, LLC dba Internet Brands