RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Need Coolant diagram (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/need-coolant-diagram-277102/)

4Fun 02-28-04 09:37 PM

Need Coolant diagram
 
I know there is a site that had this a while back. Anyone have this diagram? I had a coolant line blow on the turbo side of the car and would like a diagram to see where they all are before I take her apart. Thanks

FormerPorscheGuy 02-28-04 10:57 PM

On the turbo side you have two turbo coolant hoses. One is on top, the other is below. The top one is behind the air pump and under the y-pipe. The bottom one is a little harder to get to and is next to the front snail. Don't forget your heater hose that is in the same general area.

4Fun 02-28-04 11:07 PM

Thanks for the info, Im thinking it the one by the y pipe since that is general area that got hosed down.

FormerPorscheGuy 02-28-04 11:15 PM


Originally posted by 4Fun
Thanks for the info, Im thinking it the one by the y pipe since that is general area that got hosed down.
That's how mine went. Go get some Gates 5/16 (I think that's the size) heater hose and reuse the insulator. I would replace both while you are in there. Usually if one goes the other one is brittle. The lower one is the same size hose but has a 90 degree angle.

4CN Air 05-04-05 08:08 PM

I could use the full diagram if anyone has one, thanks


All times are GMT -5. The time now is 03:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands