its a Nippon Denso part, someone just needs to pick up the phone...
|
Part number mentioned earlier still does not show as valid anywhere. Would be great to get some complete information on this, rather than cryptic bits and pieces..
|
I had this in my amazon cart for months just went to order it and noticed it is unavailable. My TPS is showing signs of failure. I wrote Wells to inquire if they can run another batch and linked them to this thread. we'll see if anything comes of it. What are the chances of us rebuilding a TPS? Can we gut it and replace components?
|
Originally Posted by Tripple 7's
(Post 12323725)
Here are some other helpful part numbers of aftermarket throttle position sensors available for reference.
Manual Transmission 1. Wells P/N TPS4089 2. Standard Motor Products P/N TH201 "Crosses to P/N N3A1-18-911, N3A2-18-911" SMP-TH201 UPC 091769262129 3. Echlin Fuel System "NAPA" P/N CRB 216707 4. BWD P/N EC3240 Automatic Transmission 1. Beck / Arnley 158-1378 alternate P/N BCK-158-1378 UPC 49797880136 |
Originally Posted by jza80
(Post 12340838)
Part number mentioned earlier still does not show as valid anywhere. Would be great to get some complete information on this, rather than cryptic bits and pieces..
you are probably not going to like the price either, $398.30 today |
Originally Posted by j9fd3s
(Post 12341203)
the new Mazda one? its active in Japan. it is not active in Mazda USA's system, and until it does you're not going to see it listed anywhere.
you are probably not going to like the price either, $398.30 today Agree on the price! Hopefully this comes down some. |
Originally Posted by jza80
(Post 12341240)
Thanks for the info. I did not see it on Amayama's site using N3Y3-13-SLO, where do you see availability?
Agree on the price! Hopefully this comes down some. there are exceptions, but parts professionals do not use o, q, s and i in part numbers as they are too easy to confuse with letters. Mazda even shies away from B. |
Makes sense, thanks for the correction. I should have tried the substitution myself.
Well very pricey indeed, but at least a solution. Hopefully the cost comes down to closer to what the old sensor was priced at. |
This is available
https://cimg5.ibsrv.net/gimg/www.rx7...3c10a1f30b.png |
Says Temporarily out of stock again....you can order it but they dont know when it will ship
|
Originally Posted by DaleClark
(Post 12335216)
Interesting!
I'm googling around a little with that part number. Found this - https://recharge.jp/blog/culture/fd3stps/ Seems to say that the later TPS's (maybe 96+ or 99+?) are not plug in compatible with the 93-95 TPS. Dude is making an adapter harness to plug it in. Dale https://recharge.jp/blog/ecocpu-buy/ |
Apparently this KL0118911 variant looks exactly like the N3A1-18-911 FD3S TPS, positioning and all!
Picked it up used for 25 bucks shipped with pigtail too. KL0118911 TPS https://cimg6.ibsrv.net/gimg/www.rx7...b1764c1223.jpg https://cimg7.ibsrv.net/gimg/www.rx7...45dca472c6.jpg VS FD3S TPS https://cimg5.ibsrv.net/gimg/www.rx7...cb92454a57.jpg |
Neat! That may be from the MX-6 or something. Do you know what car it came from?
EDIT - answered my own question - "Fits 626, Millenia, MPV, MX-3, MX-6" Looks like about $180 or so for the part new. Dale |
but does it work?
|
^. That’s the $1M question...
|
I will let you know once I get it, just bought it today lol. I hope it works! Not the end of the world if it doesn't, I'll just use the other variant (not the same, but can still be calibrated in haltech)
|
Originally Posted by DaleClark
(Post 12374132)
Neat! That may be from the MX-6 or something. Do you know what car it came from?
EDIT - answered my own question - "Fits 626, Millenia, MPV, MX-3, MX-6" Looks like about $180 or so for the part new. Dale |
Raceonly garage is advertising a pnp FD TPS replacement.
|
test it.............
|
I bought the TPS from Race Only. I think it's going to take a few weeks to get here though
|
How much was it?
|
Originally Posted by cr-rex
(Post 12376552)
How much was it?
|
Adjust it like a OEM TPS and give up the two low voltages and the two high voltages and if the engine runs normally.
|
Thomas,
What are the results? You should have received it by now and have installed it. :dunno: On Oct. 31, I ordered an ARD alternator from RHD-Japan. It arrived in on 11 Nov. and I installed it on the 12th. |
So, I did purchase one, however in that time I realized the one on my car want actually bad, it turned out to be the wax rid wasn't completely removed and was giving me a high idle randomly. Also then my motor popped and needs a rebuild.
i will take pics when I get back home however that won't be for about a week... It's larger than the factory one and looks harder to install, but apparently it's a new denso unit, from what car, I have no idea. |
All times are GMT -5. The time now is 07:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands