My old FD - where is it now?
Anyone know where my old FD is? I'm getting back into the FD market and trying to see if it's for sale by chance.
http://bryanandsara.com/images/Old%2...ryan%20RX7.jpg http://bryanandsara.com/images/Old%2...ryan_front.jpg Any ideas where it is or who has it? Sold it almost 2 years ago to a guy in Wisconsin. Thanks. |
nice fd . gl
|
it was on ebay last week but was removed because of a scam
|
that car is stupid hot. Amazing. Respect for having such good taste.
|
I built it from the ground up over 5 1/2 years. Jahnkee in WI bought it 2 years ago, then sold it 1 year later. Now I'm ready to buy it back if it's available. Just need to locate it.
|
Originally Posted by allrotor93
it was on ebay last week but was removed because of a scam
|
if you have the vin number from old insurance papers or the old bill of sale you could always do a car fax on the vin and find out what state/city it is registered in and go from there. I dont think you will be able to get a contact number but it might help you get a little bit closer
|
Once you find out what city its in can't you talk to the DMV and find out who has a RX-7 registed in that city? Kinda like in 'Gone In 60 Seconds'? I know it was legal at one time to get that info but IDK if they stopped it.
Clean FD man! |
Was this car in an issue of super street a while back. It looks familiar? I saw it in the readers rides. I think...
|
Sharp lookin' rims. Advans?
|
Originally Posted by GoodfellaFD3S
Sharp lookin' rims. Advans?
|
get me the vin number and ill get you the address and info on who owns it
|
Originally Posted by snub disphenoid
I think they're Racing Sparco NT-Rs, could be wrong though.
Correct, 17x9. Waited forever for them. They were super light, something like 17.4lbs per rim. |
Originally Posted by gotparts?
get me the vin number and ill get you the address and info on who owns it
|
Originally Posted by bricke
Anyone know where my old FD is? I'm getting back into the FD market and trying to see if it's for sale by chance.
Any ideas where it is or who has it? Sold it almost 2 years ago to a guy in Wisconsin. Thanks. Welcome back Bricke. It's been a while :) ~Ramy |
Originally Posted by FDNewbie
I ended up buying it from him a few months later. But I don't know if you'd still want it...I ended up putting a park bench on the rear. Seats 3 with room to spare... :rofl: https://www.rx7club.com/showpost.php...4&postcount=14
Welcome back Bricke. It's been a while :) ~Ramy Haha a park bench. :rlaugh: :rlaugh: :rlaugh: |
I thought you'd like that :)
|
Hey Brian. Coming back to the dark side...
|
Originally Posted by poss
Hey Brian. Coming back to the dark side...
If I can find my old FD yeah. I'd rather not start from the ground up considering what I had done. There's a ton of tracks down here I'd like to play around on, and the Lightning makes a damn fine tow truck :) |
Originally Posted by bricke
...Lightning makes a damn fine tow truck :)
|
Originally Posted by amp
doubt that..
|
Originally Posted by bricke
422 rwhp and 508 lbs torque = tow FD easily. :fawk:
|
Originally Posted by bricke
422 rwhp and 508 lbs torque = tow FD easily. :fawk:
don't forget.. quarter mile time of 13.7 and 0-60 in the 5.4 Ties or beats an FD stock.. ;) |
Originally Posted by JHew84
towing isn't all about HP and TQ ;). An F-150 would be adequate, but I wouldn't tow anything like a car at any regularity, especially depending on the trailer.
Back to the point, if anyone has a lead, let me know :) |
Originally Posted by bricke
422 rwhp and 508 lbs torque = tow FD easily. :fawk:
and considering these numbers... you have added stress on the drivetrain.. youd be at the edge.. even with an aluminum open trailer and base model fd.. including accesories.. youd have to start thinkin about addin an aftermarket tranny cooler.. thought about gettin one for trailer duty as well but decided against it... apologies for the non related post.. ;) |
All times are GMT -5. The time now is 05:50 AM. |
© 2024 MH Sub I, LLC dba Internet Brands