My headache..er..Rx7.
Waddup guys.I post on here rarely, mainly for help. But i figured i'd get more involved with this fourm so i figured i'd post the story of my FD. 5 Month Recap, I purchased a 93 RX7 for $6,000 That needed quite a bit of work. Although the pics might not do justice on work needed, trust me, it was a headache..
Before: http://i14.photobucket.com/albums/a3...cture017-1.jpg http://i14.photobucket.com/albums/a3...cture015-1.jpg http://i14.photobucket.com/albums/a3...Picture008.jpg http://i14.photobucket.com/albums/a3...Picture010.jpg http://i14.photobucket.com/albums/a3...Picture018.jpg Since then me and my Father have redone the entire interior, Started bodywork on the exterior, Powdercoated stock rims, Installed a new Boost timer, Gauges, Etc. Installed a new sound system, As well as other little goodies under the hood. Unfortunately it is still not ready for the road. :(.. But here are some pics of the current condition of her. http://i14.photobucket.com/albums/a3...x7/The7001.jpg http://i14.photobucket.com/albums/a3...4aa9ac852f.jpg http://i14.photobucket.com/albums/a3...50f89db403.jpg http://i14.photobucket.com/albums/a3...63d0fbd219.jpg http://i14.photobucket.com/albums/a3...1965f7da7d.jpg http://i14.photobucket.com/albums/a3...cc9c0125e9.jpg http://i14.photobucket.com/albums/a3...fa0a197f3d.jpg http://i14.photobucket.com/albums/a3...18ee86ff07.jpg http://i14.photobucket.com/albums/a3...33c3465a25.jpg http://i14.photobucket.com/albums/a3...d253de9fdf.jpg Car still needs to be repainted, More bodywork needs to be done. The car doesnt like to start when hot, and we are investigating that problem now. Seats need to be put back in. Car idles kinda rough and we need to figure out why. Other modifications such as a new downpipe/midpipe. New intercooler, and other Reliability mods will be getting done shortly. I'll try and keep thins updated as best i can. :icon_tup: |
Headache or not, if you got a running FD for $6k, you got one hell of a fucking deal.
|
Great progress on the project :).
One point of constructive criticism and one comment: You might want to consider an aluminum anodized mesh for the front bumper openings, will look more stealthy and oem. Also, hot start and idling rough can be signs of engine trouble.....once warmed up, what is the idle rpm and what is the vacuum on your boost gauge? |
Originally Posted by SLOASFK
(Post 7202860)
Headache or not, if you got a running FD for $6k, you got one hell of a fucking deal.
Originally Posted by GoodfellaFD3S
(Post 7202861)
Great progress on the project :).
One point of constructive criticism and one comment: You might want to consider an aluminum anodized mesh for the front bumper openings, will look more stealthy and oem. Also, hot start and idling rough can be signs of engine trouble.....once warmed up, what is the idle rpm and what is the vacuum on your boost gauge? As far as the readings, its 12:37 over here on the east coast, so i will get you the idle rpm and other stuff tomorrow for you. :icon_tup: |
I think you and your dad might just have to learn how to rebuild a rotary soon i think that engine is bad. Sorry man I went through it to I think most of us have. Its a great car though good work.
|
Originally Posted by zack4173
(Post 7202948)
I think you and your dad might just have to learn how to rebuild a rotary soon i think that engine is bad. Sorry man I went through it to I think most of us have. Its a great car though good work.
|
Can you make me a sub box like yours? That is hot!
. |
Originally Posted by SportCoupe2
(Post 7205441)
Can you make me a sub box like yours? That is hot!
. |
idle rpm and what is the vacuum on your boost gauge?
got those readings yet? |
rough idle can be due to the Air-pump removal.... didn't see a PFC commander there so...
|
Found out that the solenoid was my problem with the car not starting when hot.
The car idles at around 1200 once its at high temperature. The vacuum gauge is only reading about 10, which i read is pretty low? |
i love the rims, how much did it cost to get them powder coated?
|
My Uncle works at Patina Auto over here in New York, and he knew someone who i could get them done with. I got them extremely cheap. It was like $45 a rim.
|
Originally Posted by SLOASFK
(Post 7202860)
Headache or not, if you got a running FD for $6k, you got one hell of a fucking deal.
|
Originally Posted by xxmicrozxx
(Post 7209972)
My Uncle works at Patina Auto over here in New York, and he knew someone who i could get them done with. I got them extremely cheap. It was like $45 a rim.
heh you think you can hook me up? :P xD |
I got mine for 9800...excellent deal you got there :)
|
All times are GMT -5. The time now is 12:15 PM. |
© 2024 MH Sub I, LLC dba Internet Brands