MSD 6A leading plus AEM trailing set up
Just after someone to check my wiring really, pretty sure it's ok but never hurts to get a second set of eyes.
I have the MSD 6A and GM twin coil on the leading and two AEM smart coils on the trailing. AFAIK the MSD doesn't need to go through a relay like the power feed on the smart coils, it takes its own switched signal to do that. Relay has a 30A fuse. https://cimg7.ibsrv.net/gimg/www.rx7...487f0d2892.png |
What ECU? Does the GM coil have an internal igniter?
|
Apexi PFC.
The GM coil is hooked up to an MSD CDI box. MSD just says to feed the box either a points trigger or signal from the igniter, am I running the risk of frying my PFC by taking the igniter out of the circuit? |
The PFC is not going to fire the MSD. Igniter must be in place to trigger MSD. The AEM smart coils have internal igniters.
|
Aw crap, back to the drawing board.
Cheers guys, saved me a headache there. |
All times are GMT -5. The time now is 08:41 AM. |
© 2024 MH Sub I, LLC dba Internet Brands