Mounting gauges in the Glove box?
I am trying to find out if anyone sells or can fabricate a mount for two-three gauges to fit professionally in the glove box of a 1994 RX-7. Yes, I'm talking show car quality:nod:!
Yes I’ve searched but most threads end up going with the airbag or center speaker mount solution. I only have one visible gauge (boost) mounted on the steering wheel pod, so please no comments about mounting them anywhere besides in the glove box out of sight. |
I don't think there are any shop-made gauge panels for the glove box. Probably wouldn't be too hard to fabricate with a sheet of plastic or carbon fiber.
Also, mounting them all the way over there is pretty useless, you won't be able to read them. The only gauges you really need on a street car are boost, water temp, and maybe a wideband. May also want to think about some sort of slim digital gauge to put in the radio pocket - you can close the door in the pocket to hide them but they're much closer to line of sight. Dale |
Originally Posted by DaleClark
(Post 10933333)
I don't think there are any shop-made gauge panels for the glove box. Probably wouldn't be too hard to fabricate with a sheet of plastic or carbon fiber.
Also, mounting them all the way over there is pretty useless, you won't be able to read them. The only gauges you really need on a street car are boost, water temp, and maybe a wideband. May also want to think about some sort of slim digital gauge to put in the radio pocket - you can close the door in the pocket to hide them but they're much closer to line of sight. Dale I want to mount a wideband and water temp in the glove box because I don't need to look at them every five minutes. I have zero fabrication skills which is why I'm asking if anyone has the ability to fab one up or has already done it. |
double post.
|
Wanna blow your mind on this one? It blew mine.. When i buy my fd im doing this and running boost and wideband. But shh, keep this on the DL, its not done alot :)
http://www.rotaryaddicts.com/?page_id=763 |
Originally Posted by NVMYRX-7
(Post 10933296)
I only have one visible gauge (boost) mounted on the steering wheel pod, so please no comments about mounting them anywhere besides in the glove box out of sight.
Thank you |
Originally Posted by F1GURIN
(Post 10933583)
Wanna blow your mind on this one? It blew mine.. When i buy my fd im doing this and running boost and wideband. But shh, keep this on the DL, its not done alot :)
http://www.rotaryaddicts.com/?page_id=763
Originally Posted by NVMYRX-7
(Post 10933691)
I repeat please only post glove box ideas.
Thank you |
This is what I want!!!
If the WRX has them, I know our powerful minds have a source:ponder:
http://www.fastwrx.com/aumeglboxgah.html 60mm gauges w/the control unit: https://www.rx7club.com/picture.php?...ictureid=43152 52mm gauges: https://www.rx7club.com/picture.php?...ictureid=43151 52mm gauges close-up: https://www.rx7club.com/picture.php?...ictureid=43153 |
HKS used to make a pod, at least they did for the FC. I had one on my old FC. Maybe try searching the net.
|
Originally Posted by Montego
(Post 10933736)
I know you're joking because people have been doing that for years IMO it is not seen much because it does require some skills. At least that is why I have never attempted doing that. As I don't really feel like experimenting on my panels if you know what I mean. Of all the people that I have seen do similar mods my favorite one was this one guy that took apart his power FC commander and seperated the screen from the buttons. In the climate controls panel he had the screen, next to the shifter he placed the buttons. And IIRC he also relocted his climate controls. The end result was quite nice.
Honestly dude I don't know of anyone that manufactures something like that for a glovebox. It is my understanding that it is all custom made. You could just go to a soundsystem place that does custom subwoofers they should wip you up something really nice. |
All times are GMT -5. The time now is 02:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands