RX7Club.com - Mazda RX7 Forum

RX7Club.com - Mazda RX7 Forum (https://www.rx7club.com/)
-   3rd Generation Specific (1993-2002) (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/)
-   -   Missing part, maybe someone knows the part number? (https://www.rx7club.com/3rd-generation-specific-1993-2002-16/missing-part-maybe-someone-knows-part-number-1128166/)

elfking 07-12-18 01:56 PM

Missing part, maybe someone knows the part number?
 
I am putting an FD back together and can't seem to figure out the part number / name of this 'support bar' which goes in front of the engine, and between the frame rails.. The airbox, intercooler and maybe battery tray attach to it? I tried to highlight where it goes in the attached picture..https://cimg9.ibsrv.net/gimg/www.rx7...0c67d5c80.jpeg
I am pretty sure this is the bar: https://www.ebay.com/itm/MAZDA-RX7-FD-INTERCOOLER-SUPPORT-BAR-CROSSMEMBER-JIMMYS/202344366574?ssPageName=STRK%3AMEBIDX%3AIT&_trksid =p2060353.m1438.l2649
but wondering if someone has the part number for it? I can't seem to figure it out?

Also looking for the part numbers for the brackets which hold the AC condenser in place..

Thanks!

DaleClark 07-13-18 07:40 AM

That picture is the correct bar. FD01-56-290a in the parts fiche.

The brackets for the AC condenser are considered part of the condenser unfortunately. I can see 2 of them attached to the car so you have those at least.

Dale

cewrx7r1 07-14-18 01:38 PM

Years ago mine cracked. I made a replacement out of aluminum angle bar for very cheap. Something like below.
Time to be a real mechanic.

https://www.homedepot.com/p/Everbilt...2587/204273981

elfking 07-14-18 05:35 PM

Thank you for the replies. I like to check part numbers when I can or at least see if anyone has them available..

Sure I could make the brackets but if I can buy them for $50 I would rather do that and save the time.

Having a one year old kid has definitely changed my view of free time vs paying for a part haha!

ZoomZoom 07-19-18 05:51 AM

People are parting out cars all the time in the for sale section.
You can always get an old part looking new with some media blasting and paint or powder coating.
Its what I did with mine when I was upgrading, cleaning and restoring my engine bay.
http://s1063.photobucket.com/user/Mi...EAA3E.jpg.html

Molotovman 07-19-18 06:23 AM


Originally Posted by elfking (Post 12288270)
Having a one year old kid has definitely changed my view of free time vs paying for a part haha!

Truest statement of all time.
If you still need that bar I have a used one for sale from my parts car- send me a PM.


All times are GMT -5. The time now is 11:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands