Mikuni OMP Wiring issue - Anybody with 97+ RX7 can help
 

hi, maybe you read my last thread, maybe not. my drive belt broke and ripped out the wiring from the omp. now i have trouble reassambling them, because on the 10pin connector B1-40 for the oil metering pump (omp), the color dont match on both sides. Since the 6 cables coming from the 6 pin connector of the omp are ripped out too, i need someone with an mikuni omp too look for the following:

- i need the pin configuration (wire color + position) of each wire on the 6 pin connector
- i need the pin configuration (wire color + position) of each wire on the 10 pin connector (one empty pin there)

if you tell me the configuration please mention where the top position of the connector is (nose) and from what side you're looking at.

i need this info URGENT, my car is at mazda an they can't repair it because they dont have access to the 99+ wiring diagram.

thanks in advance.

Not too many people on here have 99+ cars.

What I might be able to suggest is to PM Japan2LA. He's a forum vendor who often has these pumps for sale, perhaps he'd be able to email you some pictures.

-Geoff

already pmed him, but thanks :)

the wiring config is the same as the 93-95 model years...Im looking for this same info as my omp conncector was ripped off now car is in limp mode and need the diagram to wire it back correctly