Mazdatrix coil alternator relocation kit (Fd fitment)
Well I've been looking around trying to get a solution for my highly modified Fd. I'm going with no ps, no ac, and installing a electric water pump. The only kit that looks to be my best bet is the mazdatrix kit. Has anyone used one with success. I spoke with mazdatrix and they said it works for Fd. But they said it very unsure.
Just would like some confirmation before I lay the money down. In the picture it looks to fit on the Fc fine, my biggest concern is not mounting but belt alignment with the pulley. Any advice will be appreciated :icon_tup: Sammy https://cimg4.ibsrv.net/gimg/www.rx7...b50cea497.jpeg https://cimg5.ibsrv.net/gimg/www.rx7...15d70f3bd.jpeg https://cimg6.ibsrv.net/gimg/www.rx7...97ffa41b0.jpeg |
This is what I'm really needing, trying to compare?
https://cimg9.ibsrv.net/gimg/www.rx7...735d5eaee.jpeg https://cimg0.ibsrv.net/gimg/www.rx7...fc8fa34c5.jpeg https://cimg2.ibsrv.net/gimg/www.rx7...82480e50b.jpeg |
The FD and FC have opposite main pulley orientations, which means the FC bracket is not going to align the alternator to the FD main pulley, it will be sitting too far back on the engine.
|
Originally Posted by Banzai-Racing
(Post 11999534)
The FD and FC have opposite main pulley orientations, which means the FC bracket is not going to align the alternator to the FD main pulley, it will be sitting too far back on the engine.
|
First time I see a fitting going to the oil neck
(Totally out of subject) but very nice engine |
All times are GMT -5. The time now is 06:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands